Description
The Shelly Leak Sensor Extension Cable extends the water leak detection area up to 150 m
If you want to extend the coverage of a Shelly leak sensor in complex or large spaces, the Shelly Leak Sensor Extension Cable is a practical solution. The cable connects directly to the Shelly Flood Gen4 sensor and detects water along its entire length, which helps cover risk areas quickly. By chaining several sections, the detection area of the system can reach up to 150 m, suiting basements, kitchens, a utility room, a garage and the surroundings of home appliances.
Main features
- Direct connection and compatibility: the cable works reliably together with the Shelly Flood Gen4 leak sensor
- Modular length: the length of one cable is 2 m and they can be connected one after another
- Precise detection: water is detected evenly along the entire length of the cable
- Flexible installation: placing along walls, under appliances or in a groove ensures flexible installation
- Easy commissioning: a quick plug and play connection to the sensor
- Wide coverage: when several sections are connected, the detection area can reach up to 150 m
- Lower risk of damage: early detection helps react to leaks in good time
Shelly leak sensor extension cable
This extension cable increases the water leak detection range of the Shelly Flood Gen4 system in larger spaces and hard-to-reach places. The option of connecting several cables helps cover long straight sections or several risk areas, for example around home appliances and in a basement. The cable suits use where there is a risk of leaks and is an effective addition to improve protection.
Full compatibility and precise detection along the entire length
The extension cable connects directly to the Shelly Flood Gen4 sensor and works immediately. The 2 m long section detects water along its entire length, so it is easy to place in both small and larger spaces, ensuring even coverage along the chosen path.
Compatibility, range and maintenance
The product is designed for use together with the Shelly Flood Gen4 leak sensor and does not need separate power or complicated setup. The length of one cable is 2 m and when several sections are chained, the detection area of the system can reach up to 150 m, with water detected along the entire length of the cable route. If necessary, the layout can be changed later to cover new risk spots.
A separate Shelly Flood Gen4 sensor is needed for use. When placing it, keep the contact surface of the cable on the floor or another level surface where water is likely to collect first, for example under home appliances or near pipe joints. Maintenance is easy: clean the cable from time to time with a damp and then a dry cloth and test the operation with a small drop of water. Mechanical damage to the cable should be avoided.
Installation and usage recommendations
Connect the cable to the sensor and choose a path that passes through potential leak spots. Place the cable straight along the edge of a wall, under appliances or in a technical groove. If necessary, use suitable fixing means so that the cable stays in place. To achieve greater coverage, connect several sections to each other. Avoid sharp bends and make sure that the surface of the cable touches the floor at a possible leak spot.
Included in the set
- Shelly Leak Sensor Extension Cable 2 m
- Documentation
Ready to detect leaks early
If the aim is a wide and even detection area without complicated installation, this extension cable offers a practical solution. Detection along the entire length and the option of chaining sections up to 150 m make the solution suitable for both homes and technical rooms. Order now to reduce the risk of water damage and keep important areas under monitoring together with the Shelly Flood Gen4 system.



Reviews
There are no reviews yet.