Description
Smart relay with two switch inputs for lights and devices
The 1-channel smart relay SONOFF MINIR4 connects to a 2.4 GHz Wi-Fi network and switches lighting or another device up to 10 A / 2400 W at 100–240 V AC. The pack holds two relays, run by a dual-core ESP32 processor.

A smart relay stays behind the switch and controls the load from several places
A smart relay is a switching device behind a switch in the wall box or on a DIN rail in the consumer unit that switches the load from an ordinary switch as well as from an app, a schedule or smart home scenes. The MINIR4 measures 39.5 × 33 × 16.8 mm, so it fits in a flush box behind the cover plate.


Switches, sensors and Detach Relay mode
Terminals S1 and S2 accept a push button, a door exit button, a changeover (SPDT) switch, a latching switch and a dry contact sensor, and with two inputs you can control the light from two places. In Detach Relay mode the switch is decoupled from the relay state, so the load keeps its state when the switch is pressed. After a power cut the relay starts with a set delay, which reduces the inrush current of many loads starting at once.
Scenes, schedules and voice control
With motion, door and window sensors the relay switches the light on when the sensor detects motion or a door opening. You can set schedules, countdowns and recurring timers. A SONOFF R5 or S-MATE works as a local remote control using the eWeLink-Remote signal.

The relay is controlled from the eWeLink app, also over the local network (LAN), and by voice through Amazon Alexa and Google Home. The MINIR4 works with Home Assistant and SmartThings, and IFTTT scenes are available with the eWeLink Advanced plan.
Wiring and pairing
The supply connects to terminals L In and N, so the smart relay needs a neutral wire, and the load to terminals L Out and N. The terminals take 16–14 AWG wire. To start pairing mode, hold the relay button for 5 seconds.
In the box
- Smart relay SONOFF MINIR4, 2 pcs
- User manual






Reviews
There are no reviews yet.