Description
4G outdoor router with LTE Cat 7 modem and Wi-Fi 6
The MikroTik wAP ax LTE7 kit connects to the mobile network through an LTE Cat 7 modem with downloads of up to 300 Mbit/s and uploads of up to 100 Mbit/s. Carrier aggregation (2×CA) and 2×2 MIMO on the downlink improve efficiency in busy networks. Supported bands are 4G FDD B1, B3, B5, B7, B8, B20, B28 and B32, TDD B38, B40 and B41, and 3G B1, B3, B5 and B8. The router takes a Micro SIM card.
Dual-band wireless and Gigabit ports
The Wi-Fi 6 radio runs 2×2 MIMO in both bands: up to 574 Mbit/s at 2.4 GHz and up to 1200 Mbit/s at 5 GHz. Antenna gain at 2.4 GHz is 6.9 dBi. Several MikroTik devices can be managed centrally through CAPsMAN. The router has two Gigabit Ethernet ports, one of which accepts PoE power.
Power, RouterOS and enclosure
Power can be supplied through the DC jack at 12–57 V or by 802.3af/at PoE at 18–57 V, with a maximum consumption of 13 W. A dual-core ARM IPQ-5010 processor (800 MHz), 256 MB RAM and 128 MB NAND storage run the pre-licensed RouterOS v7. The IP66 enclosure is tested at ambient temperatures from −30 °C to 70 °C. The enclosure screw is hidden behind the MikroTik logo so the unit cannot be opened from outside.
Installation
The router is fixed to an external wall or roof from inside the case. An indentation on the back marks the drilling point for the cable pass-through, so the cable runs straight into the wall.
In the box
- 4G outdoor router MikroTik wAP ax LTE7 kit
- Power adapter 24 V, 0.8 A
- Gigabit PoE injector
- Hose clamp
- K-95 kit
- Plastic cable tie





Reviews
There are no reviews yet.