Description
Battery video light with S-mount and NFC pairing
The bi-colour battery video light Godox RS100Bi 1K is a 100 W light whose brightness is set from 0.0 to 100.0% in 0.1% steps. With the lens reflector it gives 28,600 lx at 1 m at 5600 K. Colour rendering is about 98 by CRI and TLCI; TLCI shows how accurately a camera reproduces colours under the light.

Battery and USB-C charging
The built-in lithium-ion battery holds 4800 mAh (87.12 Wh) and runs up to 52 minutes at full brightness. It charges through the USB-C port with a 28 V, 5 A input in about 2 hours. On first use, activate the light by connecting the USB-C charging cable; after that a long press of the power button switches it on and off.

Colour temperature, dimming curves and effects
In CCT mode colour temperature is set from warm 2800 K to cool 6500 K white. Four dimming curves are available, linear, S-curve, exponential and logarithmic, and the smoothing setting chooses between a faster response and smoother dimming. FX mode has 11 lighting effects, among them flash, lightning, candle, fire, fireworks and welding.
Control from the app, NFC and DMX consoles
The rear has a colour display, a select dial, MENU and MODE buttons and a power button. With the Godox Light app the light is controlled over Bluetooth from up to 30 m, and with an NFC phone it is added to the app (version 3.2.4 or later) by holding the phone to the light’s NFC area. Firmware is also updated through the app. A DMX512 console connects through the DMX-C2 adapter cable, which adds DMX in and out to the USB-C port, and the light supports RDM and six DMX modes.

S-mount, lens reflector and SP36K
Light modifiers attach to the Godox S-mount, which takes Godox S-mount softboxes and spot and beam modifiers. To fit the lens reflector, align it with the mount and turn it clockwise; to remove it, hold the locking pusher and turn it anticlockwise. The supplied SP36K projection attachment shapes the light spot and beam more precisely, and the light mounts with the AD-E2 holder or the 1/4″ screw hole underneath.

Use and storage
Keep the vents clear during use and place the light where heat can dissipate. Let the light cool down completely before packing it into the supplied storage bag.
In the box
- Video light Godox RS100Bi 1K, 1 pc
- Lens reflector, 1 pc
- Projection attachment SP36K, 1 pc
- Holder AD-E2, 1 pc
- USB-C charging cable, 1 pc
- Storage bag, 1 pc
- Instruction manual, 1 pc



Reviews
There are no reviews yet.