Description
Case fan set with controller and wireless remote
The set holds three 120 mm ARGB case fans and a V4.0 PWM ARGB controller, a unit that sets the colour, brightness and effects of the light and controls the fan speed. Following the motherboard’s PWM signal, the fans spin at 800–1600 rpm ±10%. Each fan delivers up to 44.35 CFM airflow (cubic feet per minute) and 1.42 mm H₂O of static pressure, with noise up to 31.21 dB(A).
Addressable ARGB lighting gives each LED its own colour
ARGB lighting is addressable RGB lighting in which every LED has its own driver chip and therefore its own colour and brightness. Each KF300 WH fan has 8 LEDs in the centre and 16 LEDs in the outer ring. The wireless remote selects the lighting mode and its speed and switches the light off.
Connecting to the motherboard and power supply
The fans’ 4-pin PWM and 5 V 3-pin ARGB connectors plug into the controller, which has 9 PWM and 9 ARGB ports. The controller is powered through a SATA cable, and the PWM input cable connects it to a motherboard fan header. With the AURA SYNC cable the controller’s ARGB signal can be routed to the motherboard’s 5 V ARGB header to sync the light with the motherboard. A magnet on the controller’s base holds it to the metal wall of the case.
Fan features
- 8 rubber pads in total on both sides of the frame to dampen vibration
- Both cables 500 mm long
- Rated voltage 12 V, current 0.15 A (up to 0.18 A) and power 1.8 W (up to 2.16 W)
- Mean time between failures (MTBF) 30,000 hours
- Controller total output up to 60 W or 10 A
In the box
- 3 ARGB fans FN12A-C8I-W
- V4.0 PWM ARGB controller
- Wireless remote
- SATA power cable
- PWM input cable
- AURA SYNC cable
- 12 screws
- User manual






Reviews
There are no reviews yet.