Description
Case fans with reverse blades for the case floor
Mounted above the PSU shroud or the floor plate, the three 120 mm ARGB case fans draw air in from below and send it into the upright case. The motherboard controls the speed through the 4-pin PWM connector between 800 and 1600 rpm ±10%. One fan delivers a maximum airflow of 44.35 CFM (cubic feet per minute), 1.42 mm H₂O of static pressure and noise up to 31.21 dB(A).
ARGB lighting lets each LED show a different colour
ARGB lighting is an addressable form of RGB light: each LED is driven by its own chip, so one fan can show several colours at once. Each KF300R WH fan has 8 LEDs in the centre and 16 LEDs in the outer ring. The light is controlled by the motherboard’s 5 V 3-pin ARGB header.
Chaining the fans
Both the PWM and the ARGB cable have a male and a female connector, so the three fans can be chained to one motherboard fan header and one ARGB header. Each cable is 500 mm long.
Key features
- Nine semi-transparent white blades
- 8 rubber pads in total on both sides of the frame to dampen vibration
- Rated voltage 12 V, current 0.15 A (up to 0.18 A), power 1.8 W (up to 2.16 W)
- Mean time between failures (MTBF) 30,000 hours
In the box
- 3 ARGB fans FN12A-C8I-R-W
- Mounting screws








Reviews
There are no reviews yet.