Description
ENDORFY Signum 300 Air computer case with four PWM fans
ENDORFY Signum 300 Air is a Midi Tower computer case for ATX, micro ATX and Mini-ITX motherboards, with four 120 mm PWM fans already installed. It suits a builder of a gaming PC or a desktop with higher cooling needs who requires strong airflow and only one motherboard fan connector. The mesh front panel lets the fans draw in air.
Main features
- Built-in PWM splitter: all four pre-installed fans are connected through a single motherboard fan connector, so four separate connectors or an additional splitter are not needed.
- Four 120 mm Stratus PWM fans: three fans are mounted on the front and one on the rear, so the case already has the fans needed to move air. In total the case has up to eight fan positions, four of which remain free for expansion.
- Mesh panel and three dust filters: the open mesh at the front directs air to the fans, and the magnetically attached filters at the front, top and bottom can be removed for cleaning without tools.
- Tempered glass side panel: the glass keeps the components visible, and the panel slides off and back on without tools, so the components can be reached for cleaning or hardware changes.
- Component clearance: the case fits a graphics card up to 325 mm long, a CPU cooler up to 161 mm high and a power supply up to 180 mm long. Check the dimensions of your components before buying, as a particularly large tower cooler may be too tall.
- Flexible drive bay layout: the interior can be set up either for four 2.5-inch SSDs or for two 2.5-inch SSDs and two 3.5-inch hard drives. This lets you choose between more SSDs or combining them with high-capacity hard drives.
- Water cooling radiator support: the front can take a 120, 240 or 360 mm radiator, the top a 120 or 240 mm radiator, and the rear a 120 mm radiator. The 360 mm front mount leaves room to move to water cooling later.
- Front panel connections: two USB-A ports and separate 3.5 mm headphone and microphone jacks let you connect everyday peripherals from the front of the case.
Space for the case and components
The case dimensions are 21.6 × 41.4 × 44.8 cm, so measure the space under your desk shelf or the spot intended for the case before installation. The case has seven expansion slots, which leaves room for a standard ATX build and additional cards.
Important before buying
The power supply is not included and must be chosen separately, taking into account the 180 mm length limit.
Included in the package
The package includes the computer case, four pre-installed Stratus 120 PWM fans, a mounting kit and a user manual.










Reviews
There are no reviews yet.