Description
A computer case with four ARGB fans for building a gaming PC
ENDORFY Ventum 200 ARGB is an ATX computer case that supports ATX, micro ATX and Mini-ITX motherboards and comes with four 120 mm ARGB fans already installed. It suits a PC builder who wants the four fans working straight after the components are fitted.
Main features
- Four Stratus 120 PWM ARGB fans: three fans are behind the front panel and one on the rear panel, so the airflow direction is set up in the case from the start.
- PWM+ARGB hub: five PWM 4-PIN and five ARGB 3-PIN connections bring the fan speed and lighting together into the motherboard connections, so no separate sockets are needed for the four fans.
- Room for large components: limits of up to 315 mm for a graphics card, up to 161 mm for a CPU cooler and up to 180 mm for a power supply give clear measurements to check your parts against before building.
- Flexible drive bays: you can fit either three 2.5-inch SSDs or one 3.5-inch hard drive and two 2.5-inch SSDs.
- Seven fan positions: four positions are already in use, and three 120 mm fan positions remain free for adding airflow later.
- Radiator support: the front panel takes a radiator up to 360 mm, the top panel up to 240 mm and the rear panel a 120 mm radiator, so the case can also be used with an AIO water cooler.
- Tool-free glass panel: the tempered glass side panel comes off without a screwdriver, so you can reach the components and connections quickly.
- Front panel connections: two USB-A ports and separate 3.5 mm headphone and microphone jacks.
Why is the front panel air intake important?
The perforated metal front panel openings are under 0.9 mm in diameter and sit directly in front of the three front fans. The removable mesh and the magnetic filters at the top and bottom let you clean the air intake without unscrewing the case.
Installation and use
Choose the drive layout depending on whether you need a 3.5-inch hard drive. Install the motherboard and components, connect the four supplied fans to the PWM+ARGB hub, and connect the hub to the matching sockets on the motherboard.
Included in the box
The box contains the ENDORFY Ventum 200 ARGB computer case, four Stratus 120 PWM ARGB fans, installation accessories, and the user and safety manual.
Important before you buy
The power supply is not included. The case supports water cooling radiators, but no water cooler or radiator is included. The front panel has no USB-C port.

































Reviews
There are no reviews yet.