Description
Case fan bearing, airflow and lighting
The ARGB case fan TUF Gaming TR120 measures 120 × 120 × 28 mm and has a hydraulic bearing. It runs at 1800–2200 rpm, with an airflow of 76.3 CFM and a static pressure of 2.75 mmH2O. With PWM control, the motherboard sets the speed within this range by pulse-width modulation.
The lighting has 16 LEDs. ARGB means addressable RGB lighting, in which the motherboard’s ARGB header controls the colour of each LED individually.
Installation and connection
- Fix each fan to the case with four screws and install all fans in the same orientation.
- Connect the fans’ PWM plugs to the supplied 1-to-3 splitter cable and the splitter cable to the motherboard fan header.
- Daisy-chain the fans’ ARGB cables using their male and female connectors and plug the free end of the chain into the motherboard ARGB header.
Through the splitter cable, all three fans run from one motherboard fan header on the same PWM signal. Up to three fans can be connected in one ARGB chain.
In the box
- 3 TUF Gaming TR120 ARGB Reverse fans
- 1 1-to-3 PWM splitter cable
- 12 fan screws








Reviews
There are no reviews yet.