Description
Case fan PWM control and connection
The PWM-controlled case fan Blade X1 is 120 mm in size, has nine blades and runs on 12 V. Its 4-pin PWM connector has a male and a female part, so several fans can be chained together. The speed can be set in the motherboard software, which controls the fan by PWM signal. The fan has no lighting.
The fourth pin of the PWM connector carries the control signal, whose pulse width the motherboard uses to change the speed without changing the supply voltage. The 32 dB noise level is measured on the A-weighted scale (dBA), which accounts for the sensitivity of human hearing at different frequencies.
Installation and cleaning
- Fix the fan at the chosen place inside the PC case with the four supplied screws.
- When installing several fans, first connect their 12 V plugs together.
- Connect the fan to a 4-pin motherboard fan header (FAN).
- Set the speed in the motherboard software.
Clean the fan only with a dry cloth.
In the box
- 1 Savio Blade X1 fan, 120 mm
- 4 mounting screws







Reviews
There are no reviews yet.