Description
Ecovacs GEX010002 10 m extension cable for GOAT A-series charging station
The Ecovacs GEX010002 is an original 10-metre extension cable for the charging station of GOAT A-series robotic lawn mowers. The cable is installed between the power adapter and the charging station, so you can place the charging station where it works most reliably, for example in a spot with better satellite or RTK signal, in the middle of the lawn, or in a shadier corner that the short factory cable does not reach.
The cable is designed to carry low-voltage power and is rated for loads up to 5 A, which meets the requirements of the GOAT A-series charging station. The original manufacturer solution ensures the correct connector shape and electrical compatibility, and reduces the failure and safety risks that come with improvised cable connections.
Main features
- Extension cable designed specifically for the Ecovacs GOAT A-series charging station
- Additional length of 10 m, giving great flexibility in choosing the charging station location
- Low-voltage power cable with a factory-set current rating of up to 5 A
- Two durable connectors that fit directly to the GOAT charging station and the original adapter
- Black, weather-resistant cable for outdoor use with the robotic mower
- Original Ecovacs accessory: no need to cut wires or make your own connections
- Light and compact; the cable is supplied coiled for delivery and storage
Technical data
- Manufacturer: Ecovacs
- Model: GEX010002
- Product type: low-voltage power extension cable for charging station
- Compatibility: Ecovacs GOAT A-series (GOAT A-Family) robotic mower charging station
- Length: 10 m
- Rated current: up to 5 A
- Colour: black
- Net weight: approx. 0.42 kg
- Gross weight (with packaging): approx. 0.52 kg
- Quantity in package: 1 cable
Uses and suitability
This Ecovacs GOAT charging station extension cable suits users whose garden layout does not allow the charging station to be installed right next to a wall socket. The extra 10 metres allow the charging station to be placed in the centre of the lawn, by a garden post, or somewhere else the robot can reach the station easily, while still being able to reach the existing socket.
The cable is compatible only with GOAT A-series charging stations and is connected between the output of the original low-voltage power adapter and the charging station’s power socket. Compatibility is not guaranteed for robotic mowers from other manufacturers or for other Ecovacs devices.
Energy saving and reliability
The cable itself does not consume electrical energy; it simply carries the existing power to the charging station at low voltage. At 10 metres, losses are minimal and do not noticeably affect the robotic mower’s charging time or energy consumption. The 5 A current rating set by the manufacturer provides a sufficient safety margin for reliable operation and helps prevent overheating and voltage drop, which can occur with poor-quality or too-thin wires.
Usage instructions
When installing, proceed as follows:
- Disconnect the GOAT charging station from the mains: first remove the 230 V plug of the power adapter from the wall socket.
- Remove the low-voltage plug of the adapter from the charging station socket.
- Connect one end of the Ecovacs GEX010002 extension cable to the charging station’s power socket.
- Connect the low-voltage plug of the original GOAT power adapter to the other end.
- Route and secure the cable so that it does not lie in the path of the robotic mower’s wheels or other garden machinery (if needed, use cable clips or a protective tube).
- Reconnect the power adapter to the 230 V socket and check that the charging station indicators switch on in the usual way.
Maintenance and safety
For long-term and safe use of the cable:
- Check regularly that the insulation is not damaged or crushed.
- If the cable is damaged, cracked or the wire is exposed, stop using it; it should be replaced.
- Avoid sharp bending, pulling taut and placing heavy objects on the cable.
- To clean, disconnect the cable from the mains, wipe with a damp, not dripping, cloth and let it dry completely before reconnecting.
- If the GOAT robot is stored for winter, the cable can be coiled and stored with the charging station in a dry indoor space to reduce the effects of UV and moisture.
The Ecovacs GEX010002 is a practical solution recommended by the manufacturer if you want to optimise the location of your GOAT A-series charging station without compromising electrical safety and reliability.



Reviews
There are no reviews yet.