Description
Spare trimmer line and brush kit for the GOAT trimmer module
The ECOVACS GKT010004 trimmer line and brushes fit the trimmer module of the GOAT O1200 LiDAR PRO, A1600 LiDAR PRO and A3000 LiDAR PRO robotic mowers. The anti-splash trimmer brushes keep grass clippings and dirt off the robot’s housing and sensors.
Key features
- Trimmer line: two reels, 3 m each
- Trimmer brushes: two, black, anti-splash
- Replacement interval: line and brush every 4–8 weeks
Replacing the line and brush
To put the trimmer into maintenance mode, hold the start button on the GOAT control panel for 5 seconds. Remove the line cover screws, pinch the clips on both sides of the cover and pull the cover out. Replace the old reel with a new one, pull the line out through the hole, close the cover and tighten the screws. Then hold the line release button and extend the line by 3–5 cm. To remove a deformed brush, press the brush clip, then push the new brush clip into the trimmer housing until it clicks into place.
In the box
- 2 trimmer line reels, 3 m
- 2 black trimmer brushes



Reviews
There are no reviews yet.