Description
Ecovacs 1.5 m extension cable for Winbot W1 and W1 Pro window cleaning robot
The Ecovacs W-EX01-0001 is an original 1.5 metre extension cable designed specifically for the Winbot W1 and W1 Pro window cleaning robots. The cable is connected between the robot’s existing power cable and the power adapter to increase the working range on higher or wider glass surfaces and to place the adapter in a safer and more convenient location.
Product overview
If the standard power cable of the Winbot W1 or W1 Pro is too short in your room, the Ecovacs W-EX01-0001 extension cable solves this shortfall easily. The additional 1.5 metres allow the robot to reach the upper edges of the window and clean larger glass surfaces without the cable being overly stretched. As an original accessory, the cable fits exactly with the connectors of the robot and the power adapter, ensuring a secure connection and the safety intended by the manufacturer.
Key features
- Original Ecovacs accessory – designed specifically for the Winbot W1 and W1 Pro window cleaning robots.
- 1.5 m of additional length – increases the total length of the robot’s power cable to clean higher and wider windows.
- Dedicated connectors – fit directly into the Winbot system; no adapters or self-made connections are needed.
- White and understated design – suits light walls and window frames and does not draw unnecessary attention.
- Flexible yet durable cable – light enough not to pull the robot back, yet strong enough for everyday use.
- Easy installation – simply connect the cable between the robot’s original cable and the adapter, and the Winbot is ready to use.
Technical data
- Manufacturer: Ecovacs
- Product series: Extension Cable (1.5 m)
- Product code: W-EX01-0001
- Length: 1.5 m
- Colour: white
- Gross weight: 0.30 kg (with packaging)
- Net weight: 0.20 kg (cable without packaging)
- Connection: Ecovacs dedicated connectors for extending the Winbot W1/W1 Pro power chain (low voltage, between the power adapter and the robot cable)
- Compatibility: Winbot W1, Winbot W1 Pro
Is it suitable for your room and needs?
The 1.5 metre extension cable is mainly suited to homes and offices where power sockets are located away from the windows or where the windows are higher than usual. The extension cable helps the Winbot W1 or W1 Pro robot clean:
- tall stairwell and living room windows;
- floor-to-ceiling glass surfaces;
- wide display windows or glass doors.
The cable itself takes up very little space when stored: it is light and compact and fits easily in the robot’s storage box or on a shelf.
Compatibility and connection
The W-EX01-0001 is intended for use only with the Winbot W1 and Winbot W1 Pro window cleaning robots. The cable is a low-voltage accessory and works within the original power adapter circuit of the robot. It does not replace a standard 230 V extension cable and is not suitable for other devices.
Connecting it is simple:
- switch off the Winbot and the power adapter;
- connect one end of the extension cable to the output connector of the power adapter;
- connect the other end of the extension cable to the robot’s original cable;
- make sure the connections are firmly secured and the cable is not under excessive tension.
Usage instructions and maintenance
In everyday use the Ecovacs W-EX01-0001 is practically maintenance-free, but the following will help ensure a longer service life and safe use:
- Do not trap the cable between sharp edges or door and window frames, as this may damage the insulation.
- Avoid strong tension or sharp bends, especially close to the connectors.
- After use, coil the cable loosely and store it in a dry indoor place.
- If you notice any damage (cracked insulation, exposed wires, damaged connector), stop using it and replace the cable.
- If necessary, clean with a dry or slightly damp soft cloth; do not use solvents or abrasive cleaning agents.
Value and durability
The original Ecovacs extension cable is designed to the same quality requirements as the Winbot W1 and W1 Pro themselves. This ensures a suitable connector standard, an appropriate wire cross-section and the manufacturer’s safety margin. Compared with universal or self-modified cables, the original accessory is a safe solution that puts neither the robot nor the power adapter at risk and helps you get the most from your Ecovacs Winbot W1 or W1 Pro investment.


Reviews
There are no reviews yet.