Description
Robot vacuum with an all-in-one station that washes the mops in hot water
The ECOVACS DEEBOT T50 PRO OMNI Gen3 robot vacuum vacuums with 25,000 Pa suction and mops in the same pass with two spinning mop plates. The robot is 81 mm tall, so it fits under beds and sofas.
LiDAR navigation and the AIVI camera work together
LiDAR navigation is a robot vacuum mapping method in which a laser sensor calculates the distance to surrounding objects from the time light takes to reflect back, and the robot assembles a map of the home from these readings. This model’s d-ToF LiDAR module is embedded in the body and measures up to 10 m; according to the manufacturer the robot maps 100 m² in 8 minutes. Camera robots recognise a room from images, and the T50 PRO OMNI Gen3 adds an AIVI 3D 3.0 camera to the laser that spots shoes, socks and cables and steers the robot around them.
The mops lift by up to 9 mm on carpet
The two spinning mop plates of the OZMO Turbo 2.0 system mop the floor, and the robot re-mops a stain straight away once the AI camera finds it. An ultrasonic sensor detects carpet and the robot lifts its mops by up to 9 mm. The TruEdge 2.0 system and ARClean side brush clean within 1 mm of walls, and ZeroTangle 3.0 keeps the brushes free of hair.
The OMNI station washes and dries the mops
The station empties the robot’s 0.206 l dust bin into its 3 l dust bag, washes the mops with 75 °C water and dries them with 45 °C warm air. The clean and used water tanks hold 4 l each, and the station adds cleaning solution itself. Drying time can be set to 2, 3 or 4 hours.
Battery and the ECOVACS HOME app
The 6400 mAh lithium-ion battery gives up to 210 minutes of runtime and charges in about 4 hours. In the ECOVACS HOME app you can choose four cleaning modes and set virtual boundaries, and the robot can also be controlled through Amazon Alexa and Google Assistant.
Getting started
Place the station against a wall on a flat, hard surface, leaving at least 0.05 m at the sides and 0.8 m in front. Then fill the clean water tank to the maximum mark, switch the robot on with the switch under the cover and connect it to a 2.4 GHz Wi-Fi network through the app.
Cleaning and maintenance
Clean the main brush and filter weekly, and the used water tank and dust collection cabin monthly. Rinse the dust bin and filter with water and let the filter dry fully before use. The manufacturer recommends replacing the washable mop pads every 1–2 months, the filter and side brush every 3–6 months and the main brush every 6–12 months.
In the box
- Robot vacuum ECOVACS DEEBOT T50 PRO OMNI Gen3, 1 pc
- OMNI station with dust bag
- Station slope base
- Side brush, 1 pc
- Washable mop pads, 2 pcs
- Power cord
- Instruction manual





Reviews
There are no reviews yet.