Description
EV wallbox with 22 kW and a tethered Type 2 cable
The VOOL EV Charger V22TMABGP EV wallbox charges at up to 22 kW and 32 A on 1, 2 or 3 phases, and its tethered Type 2 charging cable is 6.5 m long. The real charging speed depends on the building’s main fuse and the car’s onboard charger. 2-phase charging works with compatible cars and needs a 3-phase grid connection.
Control via the VOOL APP, RFID card and OCPP
The charger connects to the internet over 4G, Wi-Fi or Ethernet (IEEE 802.11 b/g/n, Ethernet 10/100). It identifies the user by RFID card or the VOOL APP. A built-in energy meter measures the energy charged. It talks to a charging management platform over OCPP 1.6, and over OCPP 2.0 together with the VOOL LMC controller; OCPP is an open protocol between the charger and the management platform. Firmware can be updated over the air (OTA), via USB or via CAN.
Dynamic load management with the VOOL LMC controller
Together with the VOOL LMC controller the charger offers dynamic load and phase management (DLM and DPM), which adjusts the charging current to the rest of the building’s consumption within 50 ms. An external energy meter connects via Modbus RTU (RS485).
Safety and outdoor use
The charger has built-in type A and type B residual current detection; the type B protection also detects DC leakage current. It also checks the relay contacts, runs a self-test and reduces charging power when it overheats. The IP55 enclosure is protected against dust and water jets, and the IK10 rating means protection against 20 J impacts. The charger works at −30 °C to +50 °C.
Installation
A wallbox is installed by an electrician. The charger suits TN and IT networks at 230 V or 400 V (±10%).
In the box
- EV wallbox VOOL V22TMABGP, 1 pc
- Tethered Type 2 charging cable, 6.5 m


Reviews
There are no reviews yet.