Description
Built-in gas hob with extractor for cleaner kitchen air
The ELICA NikolaTesla Flame Evo GR/A/88 is a modern built-in gas hob with extractor for open and compact kitchens where clean air and an even worktop are important. The centrally placed extraction opening removes steam and odours right next to the pots and pans, offering a space-saving 2in1 solution without separate hanging hoods.
Main features
- The 2in1 gas hob with extractor combines a four-burner gas hob with an extractor integrated into the worktop, reducing the need for additional appliances and keeping the worktop visually clean.
- Four gas burners, including a powerful WOK burner, allow both everyday cooking and more intensive frying and stir-frying.
- The elegant grey surface finish and tempered glass give the kitchen a contemporary look, and the smooth surface is easy to maintain with the right cleaning products.
- The integrated extractor offers energy efficiency class A, airflow in the range of approximately 160 to 365 m³/h and up to 595 m³/h in boost mode, while keeping the noise level comfortable in normal use.
- Installation is flexible, because the built-in installation allows both placement on top of the worktop and building it in flush with the surface, and as a hob approximately 88 cm wide it fits a standard 90 cm kitchen cabinet.
- Practical knob control and push-button ignition make the hob simple and logical to use, without a complicated electronic menu.
- Safety is added by a flame failure device, which cuts off the gas flow if the flame goes out, and according to the manufacturer, nozzles suitable for liquid gas are also included.
- A selection of accessory kits allows you to adapt the filter solutions and the direction of air extraction to the kitchen’s construction, and a WOK FLAME accessory is also available for specially shaped WOK cookware.
Compatibility, accessories and maintenance
The ELICA NikolaTesla Flame Evo GR/A/88 suits kitchens where the worktop width allows a standard built-in solution of approximately 90 cm. The actual width of the hob is approximately 88 cm and the depth approximately 51 cm, so it is important to check the cabinet dimensions before installation and follow the manufacturer’s installation drawings. The extractor version is recirculation mode or extraction, so the appliance can be used both in a closed system with filters and connected to an existing ventilation duct, depending on the installation conditions.
The manufacturer’s accessories include several different types of filter and extraction kits that help to fit the solution better to the kitchen’s construction. Available are filter kits that direct the air out through the plinth or in for use in recirculation mode, KIT0199836 and KIT0199835, as well as the rear outlet kit KIT0199838 and the EVO central outlet kit KIT0199839. To complement filtration, the EVO filter KIT0200786 is available, as well as the KIT WOK FLAME accessory KIT0160040 intended for intensive stir-frying, which supports the use of WOK cookware.
For a long service life, regular maintenance and cleaning are important. The tempered glass surface and cast iron pan supports should be cleaned with a soft cloth and suitable cleaning products, avoiding abrasive substances. Maintenance and replacement of the extractor filter depend on the selected filter kit, and the exact cleaning and replacement intervals are described in the manufacturer’s official user and installation manual.
Installation and use
The installation of the built-in gas hob and extractor must be carried out according to the manufacturer’s instructions and, for the gas connection, by an authorised specialist. The appliance operates on a 220–240 V power supply, so the preparation and fusing of the electrical connection must be planned together with an electrician. Before cutting the worktop, we recommend reading the exact cutting drawings and the duct connection diagram, so that the extractor recirculation or extraction system works efficiently.
- Choose a suitable operating mode decide whether you use the appliance in recirculation mode with filters or connect it to an extraction duct according to the kitchen’s ventilation options.
- Use the extractor before cooking switch the extractor on a few minutes before you start cooking and keep it running for a little while after switching off the hob to reduce odours and moisture.
- Watch the placement of burners and grates place pots and pans stably on the cast iron pan supports and choose the WOK burner for more powerful heating, especially when using WOK cookware.
Included in the set
The set includes the ELICA NikolaTesla Flame Evo GR/A/88 gas hob with an extractor built into the worktop. The exact connection details, filters and installation accessories depend on the manufacturer’s configuration, and if necessary, additional kits should be selected separately according to the installation solution.
Why choose the ELICA NikolaTesla Flame Evo gas hob with extractor
If you want a kitchen where the worktop is visually clean and functionally space-saving, the ELICA NikolaTesla Flame Evo GR/A/88 offers a practical solution by combining a gas hob and an extractor in one appliance. Four burners, including a WOK burner, allow varied cooking, and the integrated extraction opening helps to reduce steam and odours directly at the source. Thanks to energy efficiency class A and the selection of accessories, this model suits both new and renovated kitchens where a balance between design, convenience and performance is sought.





Reviews
There are no reviews yet.