Description
Induction hob with four round cooking zones
The frameless induction hob has a glass-ceramic surface with a finely bevelled front edge. On the left are two 18 cm zones, each rated 2 kW, or 3.1 kW with Power Boost. On the right are a 14.5 cm rear zone rated 1.6 kW (2.2 kW) and a 21 cm front zone with 3.7 kW and a standard power of 2.5 kW.
Controls and functions
On the DirectSelect touch bar you select the zone and one of 17 power levels, 9 main and 8 intermediate. Power Boost adds 50% power to each zone compared with the highest standard level. The switch-off timer turns the zone off at the end of the set time; alternatively you can choose a count-down timer with an alarm.
QuickStart selects the zone holding the cookware when you switch on, and Restart restores all settings after an accidental switch-off if you switch the hob back on within 4 seconds. A two-stage residual heat indicator shows which zones are still hot or warm. The child lock prevents accidental activation, the pause function halts heating and the main switch turns all zones off at once. If the hob is not touched for a preset time, the safety switch-off stops heating.
Home Connect and hood control
In the Home Connect app you can check whether the hob is switched off even when you are away from home. Remote Diagnostics allows faults to be analysed and fixed online without a service visit. The Favourite button can be assigned a frequently used function via the app. Smart Hood Automatic switches a compatible hood on when cooking starts and adjusts its fan speed to the hob settings.
Installation and dimensions
The hob measures 592 × 522 mm and is 51 mm high. The worktop cut-out is 560 × 490–500 mm, the worktop must be at least 16 mm thick and the cut-out at least 40 mm from the wall. A built-in oven can be installed below if a 20 mm ventilation gap is left behind it; with a drawer, keep at least 65 mm from the worktop surface to the drawer.
The connected load is 7400 W at 220–240 V, and the 100 cm cable without a plug is connected by an electrician. The PowerManagement function lets you limit the maximum power to suit the fuse rating of the electrical installation.





Reviews
There are no reviews yet.