Description
Induction hob with frying sensor and Home Connect
The built-in induction hob BOSCH Serie 6 PIF651HC1E is a 59.2 cm wide frameless hob with ground edges and four cooking zones. The PerfectFry Plus frying sensor regulates the pan temperature automatically and keeps food from burning.
An induction hob heats the pan base directly
An induction hob is an electric hob whose coils under the glass ceramic surface create a magnetic field that heats a pan with a magnetic base directly. On a ceramic hob the zone heats up first; on an induction hob the power changes at once and the surface around the pan stays cooler. The PIF651HC1E switches a zone off when you lift the pan away.
Four zones with PowerBoost on each
The left rear zone extends from 18 cm to 28 cm to take a large roasting dish. The left front zone is 18 cm and 2.0 kW, the right rear 14.5 cm and 1.6 kW, and the right front 21 cm and 2.5 kW. PowerBoost raises each zone up to 50% above the highest standard level, giving 3.7 kW on the right front zone. Power can be set in 17 levels: 9 main and 8 intermediate.
DirectSelect touch control and timers
On the DirectSelect touch panel you choose the zone, power level and extra function directly. QuickStart selects the zone with a pan on it when you switch on, and ReStart restores the previous settings if you switch the hob back on within 4 seconds. The switch-off timer turns a zone off at the end of the set time; the kitchen timer sounds a signal.
Home Connect and automatic hood control
Over Wi-Fi the hob connects to the Home Connect app, where you can check even when away whether the hob is switched off. With a compatible hood the two work together: the hood switches on while you cook and Smart Hood Automatic sets the fan speed automatically. The hob software updates through the app.
Child lock and residual heat indicator
The two-stage residual heat indicator shows which zones are still hot or warm. The child lock prevents unwanted use, and the main switch turns all zones off with one touch. The safety shut-off stops heating when the hob is not used for a set time.
Installation in the worktop
The hob needs a 560 × 490–500 mm cut-out in a worktop at least 16 mm thick. The cut-out sits at least 40 mm from the wall, and the worktop must carry about 60 kg. A built-in oven or drawer fits below when a 20 mm ventilation gap is left at the back. An electrician connects the hob to a 220–240 V supply; the connected load is 7400 W, and PowerManagement limits the maximum power to suit the fuse when needed.
In the box
- Induction hob BOSCH PIF651HC1E, 1 pc
- Connection cable, 110 cm



Reviews
There are no reviews yet.