Description
Built-in induction hob with an extendable roasting zone
The frameless built-in induction hob Bosch Serie 4 PIF61ABB5E with a matt black glass ceramic surface is 60 cm wide and has four cooking zones. The hob sits slightly above the worktop, so the cooking surface stands apart from the worktop.
An induction hob heats the pan with a magnetic field
An induction hob is an electric hob in which a coil beneath the glass ceramic creates an alternating magnetic field that heats the base of a cast iron or steel pan directly. The surface warms only through the pan and a power change reaches the pan at once, whereas a ceramic hob heats the zone first.
Cooking zones, PowerBoost and timers
On the left are two 180 mm zones; the rear one extends to a 280 mm roasting zone. On the right are 145 mm and 210 mm zones. PowerBoost raises the power on every zone: the 1.8 kW zones up to 3.1 kW, the 1.4 kW zone up to 2.2 kW and the 2.2 kW zone up to 3.7 kW. With the TouchSelect buttons you set one of 17 power levels; the switch-off timer turns the zone off at the set time and the minute minder sounds when the time is up. ReStart restores the settings of an accidentally switched-off hob when you switch it back on within 4 seconds.
Installation and electrical connection
The worktop cut-out is 560 × 490–500 mm, the worktop is at least 16 mm thick and the hob reaches 51 mm below the worktop. A built-in oven or a drawer can go below the hob, with a 20 mm ventilation gap behind the cabinet. The hob is permanently connected to the mains with the supplied 110 cm cable; the connection is made by an electrician. The connected load is 7400 W and PowerManagement limits the maximum power to suit the fuse when needed.
In the box
- Built-in induction hob Bosch PIF61ABB5E, 1 pc
- Supply cable 110 cm, 1 pc




Reviews
There are no reviews yet.