Description
Induction hob with two combinable cooking zones
The built-in induction hob Bosch Serie 4 PVQ611BB6E is fitted into a worktop cut-out and operated from the touch panel at the front edge. Each zone on the black glass-ceramic surface has a residual heat indicator, showing H for a hot zone and h for a warm one.
An induction hob heats the pan base with a magnetic field
An induction hob is an electric hob in which a coil under the glass-ceramic surface creates a magnetic field that heats a pan with a magnetic base directly. This hob takes cast iron or enamelled steel pans and stainless steel pans made for induction, whose base attracts a magnet. A ceramic hob heats the zone first and also works with aluminium and copper pans; an induction hob heats up faster and its surface stays cooler around the pan.
Cooking zones, CombiZone and PowerBoost
All four zones are 21 cm in diameter and rated at 2200 W. CombiZone joins the front and rear zone into one area for long pans at 3600 W with the same power level on both halves. Power is set on 17 power levels, as each main level has an intermediate step.
Timer, child lock and power limitation
The switch-off timer on each zone turns the zone off after the set time, and the kitchen timer counts 0–99 minutes independently of the zones. The child lock is switched on by touching the key symbol for 4 seconds and can be set in the basic settings to engage automatically. Power limitation sets the total power of the hob from 1000 W up to the maximum; for a 16 A fuse Bosch recommends 3500 W. If a zone runs for a long time without changes, the safety switch-off turns it off after 1–10 hours depending on the power level.
Use and cookware test
If a pan is on the hob before switching on, QuickStart detects the pan and selects the zone. Switching the hob on again within 4 seconds lets ReStart resume the previous settings. The cookware test in the basic settings shows after 10 seconds whether a pan with about 200 ml of water suits the zone.
Installation and dimensions
The hob measures 592 × 522 × 51 mm and needs a 560 × 490–500 mm cut-out. The connected load is 7400 W, the supply voltage 220–240 V and the cable length 1.1 m. An appliance without a plug may only be connected by a licensed professional. A fan sits under the hob, so leave at least 2 cm between the contents of a drawer below and the fan.
Cleaning and care
Clean the hob after every use once it is cold: remove heavy soiling with a glass scraper and clean the surface with a glass-ceramic cleaner. Remove sugar, rice starch, plastic or aluminium foil at once without waiting for the hob to cool. Clean the frame profiles with warm soapy water and a soft cloth, then dry them with a soft cloth.





Reviews
There are no reviews yet.