Description
The built-in cooker hood Elica CT17 C BL/A/52 reduces cooking odours and humidity in the kitchen
Elica CT17 C BL/A/52 is a built-in cooker hood installed in cabinets, which helps direct the fumes and odours produced during cooking out of the kitchen. The compact design suits small and medium-sized kitchens, the black painted steel blends neutrally with most kitchen furniture tones, and the LED lighting makes the worktop clearly visible.
Main features
- The built-in solution stays almost completely inside the kitchen cabinet, preserving a straight and calm line of the kitchen furniture.
- Airflow of 290–370 m³/h helps reduce the odours and humidity produced during everyday cooking in smaller and medium-sized kitchens.
- The extraction version is intended for connection to the building’s ventilation duct through a pipe with a diameter of 120 mm, which improves air exchange.
- LED lighting provides even and energy-saving illumination above the hob, so pans and pots are clearly visible.
- The black painted steel body has a neutral appearance and suits dark or contrasting kitchen furniture well.
- Electronic control allows you to choose a suitable extraction level according to the amount of steam and odours.
- Energy label D and an annual energy consumption of 71 kWh are typical for built-in hoods of this size and power.
- Readiness for the carbon filter CFC0141571 makes it possible to use the appliance also in recirculation mode when there is no chimney connection.
Compatibility, maintenance and accessories
The cooker hood is designed for installation in a kitchen furniture cabinet where the dimensions and construction of the upper cabinet allow the appliance to be installed and connected to a 120 mm ventilation pipe. Before buying, it is worth measuring the inner dimensions of the existing cabinet and the location of the ventilation opening to make sure the Elica CT17 C BL/A/52 fits. An extraction capacity in the range of 290–370 m³/h is suitable for everyday use in small and medium-sized kitchens that do not have a very large open living space.
The appliance has a removable metal grease filter, which should be cleaned regularly to maintain effective airflow and reduce grease build-up inside the cabinet. Warm water and washing-up liquid, or a suitable dishwasher programme, can be used to wash the grease filter, according to the manufacturer’s instructions. It is recommended to clean the body and control surfaces with a soft damp cloth, avoiding abrasive cleaning agents, which may damage the black surface finish.
If it is not possible to connect the cooker hood to a separate ventilation duct in the kitchen, the appliance can be converted to work in recirculation mode. For this, a separately purchased carbon filter CFC0141571 is required as an accessory, which helps bind odours before the air is returned to the room. The carbon filter is a consumable part, the replacement frequency of which depends on how intensively it is used, and the manufacturer provides more precise instructions.
Installation and use
During installation, the manufacturer’s instructions must be followed so that the cooker hood works efficiently and safely. The appliance is fixed to the structure of the kitchen cabinet and connected with a pipe with a diameter of 120 mm to the building’s ventilation duct or an outdoor opening. It must also be ensured that the minimum height given in the instructions remains between the lower edge of the cooker hood and the hob, which ensures safe use and good extraction.
- Before installation measure the kitchen cabinet opening and make sure that the power supply and ventilation connection are in a suitable place.
- Installation carry out according to the manufacturer’s installation manual or order the work from a professional installer to ensure tight connections and correct fixing.
- Use switch the cooker hood on a few minutes before cooking and leave it running for a short time after cooking has finished to remove lingering odours.
- Maintenance clean the grease filter regularly and replace the carbon filter according to the recommendations in the user manual.
Included in the set
- Elica CT17 C BL/A/52 built-in cooker hood with a factory-fitted grease filter and the necessary basic fixing points according to the manufacturer’s standard.
- Product and installation manual for safe use and maintenance.
- Carbon filter CFC0141571 is not included and must be purchased separately if needed.
When to choose Elica CT17 C BL/A/52
If you are looking for a kitchen solution that stays unnoticed by the eye but at the same time helps reduce cooking odours and humidity, the built-in Elica CT17 C BL/A/52 is a practical choice. The black painted steel body fits easily into kitchens of different designs, the LED lighting improves visibility of the worktop, and the airflow of 290–370 m³/h offers sufficient extraction for everyday cooking. The additional option of using the carbon filter CFC0141571 makes this model a flexible solution for kitchens with both extraction ventilation and recirculation mode.


Reviews
There are no reviews yet.