Description
Keep kitchen steam under control with a compact built-in cooker hood
Elica Elite 14 Lux BL/A/60 is a 60 cm wide built-in telescopic cooker hood designed to be installed in a kitchen cabinet above the hob. The black painted steel body blends in with the kitchen furniture, while the unit effectively helps reduce heat, steam and cooking smells in small and medium-sized kitchens. The cooker hood is connected to an exhaust duct, and the LED lighting ensures good visibility while cooking.
Main features
- 60 cm built-in telescopic hood – the pull-out front panel is hidden in the kitchen cabinet, keeping the furniture line even and freeing up space in low kitchens.
- Air flow 125–304 m³/h – suitable for everyday use in a small or medium-sized kitchen, helping to direct steam and smells outside while cooking.
- Exhaust version with a 120 mm duct – the cooker hood is designed to be connected to a ventilation duct with a diameter of 120 mm, which allows the air to be led out of the building.
- LED lighting – energy-saving LED light improves visibility above the hob and makes cooking more comfortable even in a dimmer kitchen.
- Mechanical controls – simple push buttons let you choose the extraction level and the lighting without complicated menus or electronic settings.
- Noise level 46–62 dB – at a lower speed the cooker hood runs more quietly and at a higher speed the power is greater, so you can choose the balance that suits you.
- Energy class D – annual energy consumption is approximately 62 kWh, which gives a good idea of the unit’s typical energy use in a home kitchen.
- Compact construction – a depth of about 28 cm and a low body height allow the hood to be installed in a standard wall kitchen cabinet.
Suitability and uses in the kitchen
Elica Elite 14 Lux BL/A/60 suits a standard 60 cm cooker or hob, which makes it a good choice for homes with common kitchen dimensions. As a built-in solution, the cooker hood disappears behind the cabinet door and only the pull-out front panel remains visible, which can be pulled out while cooking. A 120 mm diameter exhaust duct is required to connect the cooker hood, so the location of the duct route should be taken into account when planning the installation.
The installation height depends on the type of hob and the manufacturer’s recommendation, but in general at least about 50 cm of free space is left above an electric or induction hob and at least about 65 cm above a gas hob. This ensures that the cooker hood can capture steam and heat more effectively and that use remains comfortable. Before the final installation, it is always worth checking the dimensions and requirements against the specifics of your kitchen and ventilation system.
For small and medium-sized kitchens, the unit’s air flow of 125–304 m³/h offers a balance between power and noise level. At the lower extraction speed the hood suits everyday lighter cooking, while the higher speed helps to cope better with intensive frying or the simultaneous use of several hobs.
Installation and everyday use
The cooker hood is designed to be installed in a wall kitchen cabinet directly above the hob. The installation should ideally be done by a person who is familiar with the installation requirements of kitchen furniture and ventilation systems, so that both the power supply and the exhaust duct are connected correctly. It is important to follow the manufacturer’s instructions and to ensure that the 120 mm duct connection is tight and the air is led out properly.
Use is simple. When you start cooking, the front panel is pulled fully out, then the LED lighting is switched on with the mechanical buttons and a suitable extraction level is selected. After cooking, the hood can be left running for a while to remove lingering smells, and then switched off and the front panel pushed back into the cabinet.
For maintenance, the grease filter must be cleaned regularly according to the manufacturer’s instructions to maintain the reliability and extraction capacity of the cooker hood. It is also recommended to clean the visible surfaces from time to time with a soft cloth, using gentle cleaning products suitable for painted steel.
When to choose Elica Elite 14 Lux BL/A/60
This built-in cooker hood is a good fit if you prefer a discreet solution that hides in the kitchen cabinet and leaves the worktop visually clean. The 60 cm wide telescopic design, mechanical controls, LED lighting and 120 mm exhaust duct connection create a practical solution that suits most standard kitchens. If you are looking for a functional and space-saving hood that deals with steam and cooking smells and fits in with the kitchen furniture, the Elica Elite 14 Lux BL/A/60 is a choice worth considering.


Reviews
There are no reviews yet.