Description
The built-in cooker hood ELICA CT17 GR/A/52 helps reduce food odours in a small and medium-sized kitchen
The built-in cooker hood ELICA CT17 GR/A/52 is designed to be installed in an upper kitchen cabinet, keeping the worktop visually clean and uniform. Thanks to its compact width and the 120 mm exhaust duct, this appliance directs cooking steam and odours out efficiently, which is why the Elica CT17 GR/A/52 suits both smaller and medium-sized kitchens well, where you want to save space with a 60 cm appliance without losing comfort.
Main features
- 60 cm built-in solution – the cooker hood is intended for installation in a standard 60 cm wide upper kitchen cabinet, remaining discreetly flush with the furniture at the front.
- Airflow 125–224 m³/h – provides sufficient extraction during everyday cooking for a small and medium-sized kitchen, helping to reduce steam and odours.
- Duct out solution – the standard operating mode of the appliance is air extraction through a duct with a diameter of 120 mm, which carries humid and hot air out of the kitchen.
- Noise level 45–54 dB – it works quietly, so it suits open-plan living where a calm atmosphere is appreciated even during cooking.
- Energy label C – annual energy consumption of about 50 kWh helps keep running costs under control while maintaining stable performance.
- LED lighting – the energy-saving LED light makes the hob area more visible and provides even light when cooking.
- Mechanical slider control – the simple and reliable mechanical slider lets you choose a suitable power level and switch the lighting on or off.
- Option of an activated carbon filter – the model is compatible with the carbon filter CFC0141571, which helps improve odour removal when necessary if the air cannot be vented directly outside.
Compatibility with kitchen furniture and performance
The ELICA CT17 GR/A/52 is designed to be installed in a standard 60 cm wide upper kitchen cabinet, where the width of the cooker hood is approximately 53.5 cm and the depth about 30 cm. Before installation, it is worth checking the interior dimensions of the cabinet and how the door opens, so that the body of the appliance and the outlet fit comfortably and the movement of the cabinet door is not obstructed.
An airflow of 125 up to 224 m³/h suits everyday use well in smaller and medium-sized kitchens, where very large quantities of strongly steaming food are not cooked. The quieter extraction setting is suitable for lighter boiling or stewing, while the higher ones ensure more efficient air exchange when frying and during intensive use.
The body of the appliance is made of silver-coloured plastic, which blends neutrally with different kitchen styles. The plastic surface is easy to clean, and the light construction, approximately 4.3 kg, makes installation easier compared with heavier metal constructions.
Filters and maintenance
The cooker hood is equipped with a grease filter, which traps the grease particles produced during cooking and helps keep both the inside of the appliance and the air duct cleaner. The grease filter should be cleaned regularly according to how often the hood is used, typically every few weeks to every couple of months. It is recommended to remove the filter and wash it with warm water and washing-up liquid or in a dishwasher on a suitable programme, if the manufacturer’s instructions allow it.
If the air cannot be vented out through an exterior wall in the kitchen, the cooker hood can be used as a recirculation unit together with the activated carbon filter CFC0141571. The carbon filter helps reduce food odours by cleaning the air before it is returned to the room. The activated carbon filter is a consumable part that needs to be replaced periodically according to the usage load and the manufacturer’s recommendations.
Installation and use
When installing the built-in cooker hood, the appliance is fixed to the structure of the upper kitchen cabinet, following the dimensions and fixing point diagrams given in the manufacturer’s installation instructions. To extract the air, the outlet connector of the appliance is connected to a ventilation duct with a diameter of 120 mm, which directs the air either into the building’s ventilation system or directly out through an exterior wall.
- Before installation, measure the interior dimensions of the cabinet, plan the route of the air duct and make sure there is enough space for the 120 mm duct.
- When making the electrical connection, use an earthed socket or a permanent connection according to the instructions and, if necessary, consult an electrician or an installation specialist.
- During everyday use, switch the cooker hood on a few minutes before cooking and let it run for a few minutes after finishing, to remove remaining moisture and odours.
- The LED lamp of the lighting becomes hot, so avoid touching it immediately after switching the appliance off.
Why choose the ELICA CT17 GR/A/52 built-in cooker hood
The ELICA CT17 GR/A/52 suits a user who wants a solution that is integrated into the kitchen as unobtrusively as possible, but does not want to give up effective extraction and proper lighting. A reasonable airflow, a modest noise level of 45–54 dB, LED lighting and simple mechanical slider control make it a practical choice for everyday cooking. If necessary, the system can be supplemented with the activated carbon filter CFC0141571, which increases the efficiency of odour removal in kitchens where direct extraction is not possible.



Reviews
There are no reviews yet.