Description
The built-in FABER Inka Smart C LG A52 hood keeps the air in the kitchen cleaner and odours under control
The built-in FABER Inka Smart C LG A52 kitchen hood is designed to be installed in the underside of an upper kitchen cabinet, so that only the bottom surface remains visible. Thanks to an airflow of 160–336 m³/h and three operating speeds, this model suits everyday use in small and medium-sized kitchens, helping to reduce food odours and moisture. The LED lighting illuminates the hob evenly, and the energy efficiency class C and annual energy consumption of 59 kWh keep running costs at a reasonable level.
Main features
- Built-in 55 cm hood – fits inside the upper kitchen cabinet, keeping the overall look of the kitchen clean and uniform, and suits a standard 60 cm wide wall cabinet well.
- Airflow 160–336 m³/h – the three-speed power range lets you adjust the strength of extraction for both gentle cooking and more intensive frying.
- Noise level 54–66 dB – a balanced noise level in normal operating mode, which will not become excessively disturbing in daily use when the hood is installed correctly.
- LED lighting – energy-saving LED light ensures good visibility on the hob and helps reduce the need for separate work lights.
- Mechanical slider control – a simple slider lets you quickly choose the operating mode and switch the lighting on and off, without complicated electronics.
- Energy efficiency in class C – annual energy consumption of about 59 kWh helps keep electricity costs under control while maintaining effective air exchange.
- 150 mm exhaust outlet – a large connection opening allows effective connection to a ventilation duct and ensures better airflow than smaller-diameter solutions.
- Grey plastic finish – the neutral grey tone and plastic surface suit different kitchen furniture styles well and are easy to clean.
Compatibility, accessories and maintenance
The standard width of the hood, 55 cm, makes it a practical solution for kitchens where the outer width of the cabinet is usually 60 cm. The hood is designed to be integrated into an upper kitchen cabinet, so before buying it is worth measuring both the interior dimensions of the cabinet and the distance from the hob. The appliance is designed primarily for extraction into a ventilation duct, but it can also be used in recirculation mode if suitable activated carbon filters are added.
An activated carbon filter is required as an accessory if the ventilation duct cannot be used and you want the air to circulate back into the room. Carbon filters are usually not included in the set and must be purchased separately according to the type recommended by the manufacturer. For extraction, air ducts and connecting sleeves of a suitable diameter are needed, and when choosing them it is worth preferring 150 mm diameter solutions to maintain good airflow.
To simplify maintenance, the hood has grease-trapping filters, which should be cleaned regularly according to how often the hood is used. The filters can usually be removed and washed by hand with warm water and a degreasing agent. In recirculation mode, activated carbon filters need to be replaced periodically so that odour removal stays effective. It is also recommended to keep the hood surface and control panel clean by wiping them with a damp, soft cloth.
Installation and use
Before installation, read the manufacturer’s user and installation manual carefully and check that the kitchen cabinet is strong enough to support the hood. The hood is fixed to the underside of the cabinet and then connected to a ventilation duct with the 150 mm exhaust outlet, or set to recirculation mode if carbon filters are used. When making the electrical connection, the applicable safety requirements must be followed and, if necessary, a qualified electrician should be involved.
Use is simple: with the mechanical slider you switch the hood on and off and select the desired extraction level. The lower speed suits everyday quieter operation, while the higher speeds are for removing stronger odours and steam. You can also control the LED lighting with the slider, to ensure good visibility on the hob exactly when you need it.
Included in the set
- FABER Inka Smart C LG A52 built-in kitchen hood
- Factory-installed LED lighting
- Integrated grease filters (according to the model’s factory setup)
When to choose the FABER Inka Smart C LG A52 hood
The FABER Inka Smart C LG A52 is a practical choice if you are looking for a kitchen hood that is as unobtrusive as possible yet effective, and fits inside the upper cabinet. This model combines moderate airflow and noise level, LED lighting and simple mechanical control that does not require complicated electronics. If you want to keep the air in the kitchen cleaner while maintaining a calm and uniform kitchen design, this built-in solution is a suitable and balanced choice for a small or medium-sized kitchen.


Reviews
There are no reviews yet.