Description
Clean air in a kitchen with a hidden design thanks to the built-in Elica Lane Sensor IX/A/72 cooker hood
The fully integrated Elica Lane Sensor IX/A/72 cooker hood is designed to be installed in a kitchen cabinet, leaving only a narrow stainless steel edge visible. Powerful airflow of 255 to 650 m³/h, perimeter extraction and automatic sensor control help reduce cooking odours and steam in both open and closed kitchens.
Main features
- A fully integrated solution that is hidden in an upper kitchen cabinet in a module about 80 cm wide and leaves a discreet stainless steel front edge visible.
- Three operating speeds and an intensive mode ensure efficient air exchange, the maximum airflow is up to 650 m³/h, which suits medium and larger home kitchens well.
- Perimeter extraction directs the incoming air along the edges, which helps capture steam and grease better and keep visible surfaces cleaner.
- The integrated air sensor and automatic mode change the extraction speed by themselves according to the amount of steam and odours, so you do not have to change the settings manually every time.
- Wi Fi and a wireless connection to the hob allow automatic switching on and off with compatible appliances and more convenient control.
- Energy-saving LED lighting illuminates the hob evenly, and with the option of connecting a dimmer the brightness can be matched to the rest of the kitchen lighting.
- Energy class B, annual energy consumption of about 69 kWh and a noise level in the range of 49 to 68 dB provide a balance between performance and comfort.
- The air outlet diameter is 150 mm, which suits the most common ventilation pipes and air duct solutions.
Compatibility with kitchen furniture and uses
The Elica Lane Sensor IX/A/72 is suitable for hiding in an upper kitchen cabinet that is approximately 80 cm wide. This way the front panel stays almost invisible and the overall look of the kitchen stays uniform. The cooker hood can be used both in extraction mode and as a recirculation solution, depending on whether you can connect the appliance to a ventilation shaft.
In extraction mode the air is directed straight out through a 150 mm pipe, which ensures the best removal of odours and moisture. If access to the ventilation opening is difficult, the cooker hood can be used with recirculation by adding a suitable carbon filter CFC0140343. For long-term use there is also a regenerable carbon filter CFC0162221, which can be restored several times following the manufacturer’s instructions. Carbon filters are not normally included and must be bought separately if desired.
Airflow of up to 650 m³/h is sufficient for most home kitchens. Even if the kitchen is open to the living room, the automatic mode helps keep odours under control without you having to change operating modes constantly.
Installation and use
The cooker hood is installed in a kitchen cabinet so that only the stainless steel front edge remains visible. For proper operation and safety it is recommended that the installation is done by a qualified specialist, who takes into account the cabinet dimensions, the length of the ventilation pipe and the overall ventilation of the kitchen. The connection is made with a pipe of 150 mm diameter or, in the case of recirculation, with a suitable carbon filter.
- To use it, select a suitable extraction speed with the electronic control panel and switch on the LED lighting if necessary.
- Use the intensive mode for a short time, for example when frying or cooking strong-smelling food.
- In sensor mode the cooker hood adjusts its power automatically according to the amount of steam and odours, which makes everyday use easier.
- Regularly remove and clean the metal grease filters according to the user manual, and replace or regenerate the carbon filter when you notice that odours are neutralised less effectively.
Why choose the Elica Lane Sensor IX/A/72 built-in cooker hood
The Elica Lane Sensor IX/A/72 combines a hidden integrated design, powerful airflow and automatic sensor control. The stainless steel front panel, energy-saving LED lighting, Wi Fi and the option of using either an extraction or a recirculation solution make it a balanced choice if you want to keep the air in the kitchen cleaner without compromising on design.




Reviews
There are no reviews yet.