Description
Clean air and discreet design for your kitchen – Elica Enter BL MAT/A/52 fully integrated cooker hood
Elica Enter BL MAT/A/52 is a fully integrated cooker hood that is hidden inside a kitchen cabinet, so that only a narrow front edge remains visible. The painted steel body with a black matt finish fits well with the style of modern kitchens and helps keep the worktop visually clean. The system with perimeter extraction and an airflow of up to 650 m³/h remove steam and cooking odours effectively, while the LED lighting ensures good visibility above the hob during everyday cooking.
Main features
- Fully integrated solution – installed in a kitchen cabinet, which makes the cooker hood almost unnoticeable and suits kitchen furniture with straight lines well.
- Standard width 55 cm and an actual width of about 51.4 cm allow the appliance to be installed inside most 60 cm wide wall cabinets, saving space and keeping the worktop free.
- Perimeter extraction – air is directed towards the edges of the intake openings, which helps collect steam and odours better and distributes the extraction power more evenly across the whole hob area.
- Airflow of up to 650 m³/h with several speeds suits both everyday cooking and more intensive frying, to reduce the spread of cooking odours and grease in the kitchen.
- LED lighting belongs to light class A, providing bright and energy-saving light above the hob surface and improving visibility when preparing food.
- Energy class B and an annual energy consumption of about 69 kWh give a balance between performance and energy use, which makes the appliance suitable for everyday use in a home kitchen.
- Noise level 49–68 dB means that the cooker hood is relatively quiet at the lower settings, while the maximum and boost modes provide maximum extraction power especially during intensive cooking.
- 150 mm exhaust duct connection and an integrated non-return valve help direct the air efficiently into the ventilation duct and reduce the backflow of cold air and odours into the room.
Compatibility with kitchen furniture and ventilation
The cooker hood is designed as a built-in solution and usually fits into 60 cm wide wall cabinets. The appliance is approximately 51.4 cm wide, 28.3 cm deep and up to about 32.2 cm high, which allows it to be integrated into most standard kitchen furniture. Before installation, however, it is worth re-measuring the interior dimensions of your kitchen cabinet to ensure a fit and sufficient room for the ventilation duct.
The Elica Enter BL MAT/A/52 is a model working in extraction mode, intended to be connected to an existing ventilation duct. The diameter of the exhaust duct is 150 mm, which helps keep the airflow smooth and reduce resistance in the duct. When planning the installation, take into account the location of the ventilation shaft and the route of the ducting, in order to achieve a connection that is as straight and short as possible.
The model does not support Wi-Fi or a wireless connection with the hob and does not include automatic air sensors. It suits a user who prefers a simple and reliable solution where all settings are controlled directly from the cooker hood panel.
Use and maintenance
The cooker hood has electronic control, which allows you to select different speeds according to the intensity of cooking. For everyday cooking a lower or medium setting is usually sufficient, while during heavier frying it makes sense to use a more powerful mode, which makes use of the appliance’s maximum airflow of up to 650 m³/h. The LED lighting can be switched on as needed to ensure sufficient light on the hob surface.
For the best result, it is recommended to switch the cooker hood on shortly before you start cooking and leave it running for a few minutes after switching off the hob. This also removes residual moisture and odours from the room. When using the maximum and boost modes, bear in mind that the noise level is higher, but it ensures faster air exchange.
From a maintenance point of view, it is important to clean the grease filters regularly according to the manufacturer’s instructions. The metal grease filter is removed from the cabinet; it can be washed by hand with warm water and a suitable washing-up liquid, and in many cases also in a dishwasher, if the user manual allows it. If a carbon filter is added to the system, it must be replaced or regenerated from time to time according to the interval recommended by the manufacturer. The outer surface of the cooker hood should be cleaned with a soft cloth and mild cleaning agents, avoiding abrasive substances, which may damage the black matt finish.
Installation and use
To ensure safe and correct operation, it is recommended that the installation and electrical connection of the cooker hood be carried out by a qualified specialist. During installation, the manufacturer’s instructions and the applicable electrical and fire safety requirements must be followed. The cabinet in which the appliance is installed must be strong enough to carry the appliance, which weighs approximately 9.5 kg, and must provide access to both the ventilation duct and the power connection.
The installation steps include preparing a suitable opening in the kitchen cabinet, securely fixing the cooker hood, connecting the 150 mm diameter duct to the ventilation duct, and the electrical connection. After installation, all operating modes and the lighting should be tested to make sure that the airflow is even and the noise level of the appliance meets expectations.
When to choose the Elica Enter BL MAT/A/52 cooker hood
Choose the Elica Enter BL MAT/A/52 if you want a fully integrated cooker hood for your kitchen that offers strong extraction of up to 650 m³/h, perimeter extraction and energy-saving LED lighting. Energy class B, the compact 55 cm standard width and the black matt finish make this model a good choice for smaller and medium-sized kitchens where both a discreet look and reliable air exchange are wanted during everyday cooking.




Reviews
There are no reviews yet.