Description
Built-in cooker hood for an open kitchen: cleaner air and convenient control with an in-cabinet solution
FABER INKA LUX PREMIUM X A52 KL is a 60 cm wide built-in cooker hood that is installed inside the kitchen furniture and connected directly to the ventilation duct. Strong extraction of up to 670 m³/h, perimeter extraction and a stainless steel body help reduce cooking odours and vapours in smaller kitchens as well as in open-plan kitchen solutions. LED lighting ensures good visibility of the hob surface, and Wi-Fi and wireless control functions add ease of use. The wireless connection with the hob works only with FABER hobs.
Key features
- Built-in solution – it is built into the cabinet, so the kitchen interior stays visually uniform and the cooker hood does not draw too much attention.
- Airflow of up to 670 m³/h – the minimum airflow is about 260 m³/h, the maximum 580 m³/h, and in intensive mode up to 670 m³/h, which helps to quickly reduce steam and odours while cooking.
- Perimeter extraction – air is drawn in mainly near the edges of the panel, which increases efficiency and helps keep the front panel visually cleaner.
- Wi-Fi and wireless connection with the hob – the cooker hood can be controlled thanks to smart functions and the wireless connection, although automatic pairing with the hob works only with FABER hobs.
- Stainless steel finish – neutral and durable stainless steel suits different kitchen styles easily and is simple to clean.
- LED lighting with Tune White function – energy-saving LED lighting provides even light over the hob area, and the Tune White function allows you to adjust the tone of the white light to your preference.
- Energy efficiency class B – annual energy consumption of about 70 kWh helps keep running costs under control while maintaining strong extraction power.
- 150 mm exhaust duct connection – the large exhaust duct diameter and the built-in butterfly valve help reduce backflow and improve air exchange.
Compatibility, accessories and maintenance
This model suits kitchens where an exhaust duct with a diameter of 150 mm can be installed and where the cabinet module is intended for a built-in cooker hood (standard width 60 cm, installation opening width approx. 49.2 cm and depth 29 cm). Wireless integration with the hob works only with FABER hobs – when used with hobs from other manufacturers, the cooker hood works like a regular appliance that is controlled manually. For compatibility (cabinet dimensions, ventilation duct route and electrical connection), follow the manufacturer’s installation instructions and, if necessary, consult an installation specialist.
The cooker hood works in extraction mode (duct out) in the factory setting, i.e. the air is led out through a duct. As optional equipment, various charcoal filter kits are available for this model, such as Charcoal filter F8 KIT, Charcoal filter High Performance FHP8 KIT and Charcoal filter Long Lasting FLL8 KIT, as well as the ENERGY Remote blower kit. These are accessories sold separately, and the need to use them depends on the chosen ventilation solution and the manufacturer’s instructions.
Regular maintenance helps to preserve the efficiency of the cooker hood. How often the grease filters (and, if necessary, charcoal filters) need to be cleaned or replaced depends on how often it is used and is described in detail in the user manual. It is recommended to clean the grease filters regularly and to check the condition of the ventilation duct and the butterfly valve that prevents backflow from time to time.
Installation and use
The cooker hood is intended for installation in a kitchen cabinet or structure designed for a built-in cooker hood. Before installation, the internal dimensions of the cabinet must be measured and the height of the appliance, about 325 mm, taken into account. The ventilation duct diameter should be 150 mm in order to maintain the performance of the appliance and avoid excessive noise. The installation height above the hob surface must comply with the recommendations of the manufacturer and local safety requirements, and the electrical connection may only be made by a qualified specialist.
Use is simple – the cooker hood is set up with electronic controls and a suitable extraction level is chosen according to the intensity of cooking. The noise level is about 54 dB in the quieter modes, approximately 66 dB at maximum speed and up to 69 dB in intensive mode. The LED lighting can be switched on independently of the extraction to ensure good visibility on the hob. The Wi-Fi function and possible app control must be set up according to the manufacturer’s instructions.
Why choose the FABER INKA LUX PREMIUM X A52 KL cooker hood?
FABER INKA LUX PREMIUM X A52 KL is a good choice if you are looking for a discreet but capable built-in cooker hood for your kitchen that offers strong extraction, perimeter extraction technology and energy efficiency in class B. The stainless steel body, LED lighting with the Tune White function and the ability to integrate with FABER hobs create a modern and practical solution for both a new and a renovated kitchen. Thanks to the charcoal filters and accessories offered as optional equipment, the cooker hood solution can be adapted to the ventilation needs of a specific kitchen.


Reviews
There are no reviews yet.