Description
Clean air and a discreet solution in the kitchen: built-in cooker hood FABER Inka Lux Evo BK Matt A52
FABER Inka Lux Evo BK Matt A52 is a cooker hood built into a kitchen cabinet, which keeps the front of the kitchen furniture uniform while keeping the air fresh during cooking. Perimeter extraction and an airflow of up to 620 m³/h help remove steam and odours, LED lighting ensures good visibility of the hob, and energy efficiency class B helps keep everyday energy costs under control.
Main features
- Built-in 60 cm cooker hood – designed to be installed in a kitchen cabinet above a 60 cm hob, to keep the furniture design uniform and free up wall space.
- Airflow 280–620 m³/h – an operating range from a quieter mode to a powerful booster, which helps remove cooking odours even during intensive frying.
- Perimeter extraction – directs the air intake to the edges of the panel, which improves extraction efficiency and reduces the visible part of the filter surface.
- Exhaust with a diameter of 150 mm – the air is led out through a ventilation duct, and the non-return valve (butterfly valve) helps reduce the backflow of cold air and odours.
- LED lighting – energy-efficient class A lighting that provides even light on the hob and helps reduce the need for separate worktop lighting.
- Energy label B – annual energy consumption of about 75 kWh, which offers a balance between performance and energy cost in everyday use.
- Noise level 47–67 dB – quieter operation at lower speeds and greater extraction power in the maximum modes, which suits short intensive use well.
- Electronic control – clear and simple control allows you to select a suitable extraction speed and switch the LED lighting on or off as needed.
Compatibility, accessories and maintenance
The standard width of the cooker hood is 60 cm, the width of the body is approximately 49.2 cm and the height is about 317.6 mm, so the internal dimensions of the upper cabinet must be checked before purchase. A pipe with a diameter of 150 mm is used to connect the exhaust. If you are unsure whether the model fits an existing cabinet, it is recommended to look at the technical drawing or consult an installer. Detailed dimensions and installation requirements can be found in the installation and user manual.
If it is not possible to vent the air out of the kitchen or you want to use recirculation, activated carbon filter kits can be added according to the manufacturer’s instructions. Accessories listed include, for example, Charcoal filter F8 KIT (code 112.0157.240), Charcoal filter High Performance FHP8 KIT (code 112.0158.127) and Charcoal filter Long Lasting FLL8 KIT (code 112.0185.278). These kits are purchased separately and the options for using them are determined by the manufacturer’s installation and user manual.
To maintain the efficiency of the cooker hood, the grease filter must be cleaned regularly and the carbon filters (if used) replaced periodically according to the manufacturer’s recommendations. A soft cloth and a suitable cleaning agent help preserve the surfaces of the body, avoiding abrasive substances. LED lighting generally has a long service life and does not need frequent replacement.
Installation and use
FABER Inka Lux Evo BK Matt A52 is designed to be installed in an upper cabinet so that only the lower part of the cooker hood remains visible. During installation, the opening in the cabinet must be measured, the body fixed using the fixing points provided by the manufacturer, the exhaust pipe with a diameter of 150 mm connected, and the electrical connection made in accordance with the applicable requirements. For safety and reliability, it is recommended to use a qualified installer and always follow the installation manual.
In use, it is recommended to switch the cooker hood on a little before cooking begins and to keep it running for a few minutes after finishing, to remove residual odours and moisture. The fan speed can be selected according to the intensity of cooking, from a quieter mode to a strong booster. The LED lighting can be used as worktop lighting even when the fan is not running.
When to choose FABER Inka Lux Evo BK Matt A52?
This cooker hood is suitable if you are looking for a discreet built-in solution that blends into the kitchen cabinet but can move up to 620 m³ of air per hour when needed. Perimeter extraction, LED lighting and energy efficiency class B offer a balance between performance, convenience and energy cost. If you value a tidy kitchen and want to keep cooking odours under control, FABER Inka Lux Evo BK Matt A52 is a practical choice, which can be supplemented when needed with special carbon filter kits and other accessories offered by the manufacturer.


Reviews
There are no reviews yet.