Description
The built-in 50 cm Elica ELITE 14 LUX cooker hood reduces cooking odours in a small kitchen
The Elica ELITE 14 LUX BL/A/50 built-in pull-out cooker hood is designed to be installed in a wall cabinet to effectively extract steam, grease and odours produced during cooking. The compact 50 cm wide solution suits small and medium-sized kitchens well, where saving space and a discreet look are important. The black finish, LED lighting and simple mechanical control help create a cohesive and practical kitchen environment.
Main features
- Built-in telescopic design – installed in a kitchen cabinet, the front panel is pulled forward during cooking and pushed back after use, so the cooker hood is mostly hidden inside the cabinet.
- 50 cm standard width – the actual width of the appliance is about 49.8 cm and the depth is 28 cm, which fits common 50 cm wall cabinets and helps make efficient use of space even in a narrower kitchen.
- Air flow 125–304 m³/h – allows you to set the operating mode as needed, suitable for everyday use in small and medium-sized kitchens where quickly reducing cooking odours is important.
- Noise level 46–62 dB – at a lower speed the cooker hood runs more quietly, at a higher speed the power increases, but the noise level stays moderate for everyday use.
- LED lighting – the integrated LED lamps light the hob evenly and energy-efficiently, making cooking more comfortable.
- Mechanical control – clear control knobs let you choose a suitable speed setting and switch the lighting on or off, without complicated electronics.
- 120 mm exhaust outlet – the cooker hood is designed to be connected to a ventilation duct with a diameter of 120 mm, which is widely used in kitchen ventilation.
- Black colour and painted steel body – the durable construction and modest black tone suit different kitchen styles and are easy to maintain.
Fit for your kitchen and maintenance
The Elica ELITE 14 LUX BL/A/50 is designed to be integrated into a cabinet, so it is worth measuring the inner dimensions of the wall cabinet before buying. The width of the appliance is approximately 49.8 cm, the depth 28 cm and the maximum height about 140 mm, so it mostly fits 50 cm wall cabinets. The cooker hood is connected to a 120 mm ventilation duct, which allows steam and odours to be directed out of living spaces.
The cooker hood has a reusable metal grease filter that catches grease particles. It is recommended to clean the filter regularly, depending on how often you cook. For cleaning, the filter can be taken out of the cabinet and washed either by hand with a mild detergent or, if necessary, in a dishwasher, if the manufacturer’s instructions allow it. For care of the body and front panel, a soft cloth and a gentle cleaning agent that does not damage the painted surface are enough.
The cooker hood is factory-set for air extraction into a ventilation duct, i.e. as a duct out version. Many similar models can optionally be used in recirculation mode with an activated carbon filter, but for this option and the necessary accessories it is sensible to check the installation manual of the specific model or ask a specialist for clarification.
Installation and use
During installation, the manufacturer’s instructions must be followed to ensure safe and efficient operation. Below are general steps that help plan the installation process.
- Determine the installation height – plan the location of the cooker hood according to the type of hob, following the minimum distance given in the manual above an electric hob or gas hob.
- Prepare the wall cabinet – mark and cut the required opening in the bottom of the cabinet according to the dimensions of the appliance and, if necessary, make an opening in the back wall or the top of the cabinet for the ventilation duct.
- Connect the ventilation duct – connect the 120 mm duct to the exhaust outlet of the cooker hood and direct the duct into the building’s ventilation channel, avoiding excessive sharp bends that can reduce air flow.
- Fasten the cooker hood in the cabinet – lift the appliance into the cabinet structure and fasten it with the fixings provided by the manufacturer, checking that the cooker hood is straight and firmly in place.
- Connect the power supply – have the electrical connection made by a qualified specialist to ensure safety and compliance with current requirements.
- Check the operating modes – after installation, try all speed settings, test the LED lighting and make sure the movement of the extracted air is even.
When to choose the Elica ELITE 14 LUX BL/A/50
This built-in 50 cm cooker hood suits you if you want to keep a uniform line in the kitchen and prefer the appliance to stay mostly hidden inside the cabinet. An air flow of up to 304 m³/h is sufficient for everyday cooking in a small and medium-sized kitchen, helping to reduce moisture and cooking odours. LED lighting and mechanical control create a simple and reliable solution that is handy to maintain. If you are looking for a built-in cooker hood with a modest look but full functionality, the Elica ELITE 14 LUX BL/A/50 is a practical choice.


Reviews
There are no reviews yet.