Description
A built-in cooker hood for a cleaner and odour-free kitchen
Electrolux LFP226S is a 60 cm wide built-in pull-out cooker hood that helps keep the kitchen air cleaner during everyday cooking. The hood is connected to a ventilation duct, removing fumes and cooking odours directly outside and ensuring consistently fresher air in a small or medium-sized kitchen.
Main features
- Built-in and pull-out design allows the hood to be installed in a kitchen cabinet so that the unit is hidden and only the front panel is visible, which can be pulled out when needed.
- Air flow of 150–330 m³/h is suitable for everyday use in small and medium-sized kitchens, helping to reduce steam and odours during normal cooking.
- Duct out solution directs the air out through a 150 mm ventilation duct, which helps to effectively remove moisture and odours directly from the room.
- LED lighting provides even light to the hob surface so that the cooking area is clearly visible and the lighting is energy-saving.
- Washable grease filter effectively collects grease and can be cleaned by hand or in a dishwasher, which simplifies maintenance and helps to preserve the hood’s performance.
- Mechanical controls make use clear and convenient, allowing you to select a suitable extraction level and switch the lighting on or off.
- Grey finish and painted steel match modern kitchen furniture tones and offer a durable surface for everyday use.
- Energy efficiency class C and annual energy consumption of 52 kWh help keep energy use at a reasonable level considering the capability of the unit.
Precise LED lighting for the whole hob surface
The hood’s LED lighting evenly illuminates the entire hob area, which makes cooking more convenient and easier to follow. The “Pure Illumination” solution gives a clear light so that you can see well the contents of both the pot and the pan, and you can follow the cooking even in a dimmer kitchen when needed.
Washable grease filter for easy maintenance
The hood has a washable grease filter that helps reduce grease particles in the kitchen and keep the internal parts better protected. The filter can be washed under running water or in a dishwasher, which makes maintenance easier and helps preserve the unit’s extraction power and reliability over a longer period.
Compatibility with the kitchen and ventilation, and accessories
The Electrolux LFP226S is designed to be installed in a 60 cm wide kitchen cabinet; its actual width is about 59.8 cm and depth about 28.4 cm. The model is a duct-connected solution, so before installation you should make sure that the existing ventilation duct matches the 150 mm diameter and that the construction of the kitchen furniture allows the duct to be routed.
According to the product data, this is a duct out type hood designed to extract air into a ventilation duct. The product description refers to the ECFB03ST OdourClean carbon filter, which is designed to reduce odours, but its inclusion in the set has not been confirmed and its suitability for a specific installation solution should be clarified before purchase.
Regular maintenance of the washable grease filter helps preserve the hood’s performance and extend its lifespan. Depending on how often it is used, it is sensible to check the filter from time to time and clean it when it is visibly dirty, which helps reduce grease build-up both in the filter and in the ventilation duct.
Installation and use
The Electrolux LFP226S is designed to be installed in a kitchen cabinet, where the unit is fixed to the furniture structure and connected to the ventilation duct. The electrical connection should be made in accordance with applicable safety requirements, and if necessary a qualified installer should be used to ensure compliant and safe work.
- During installation, check that the width and depth of the cabinet match the dimensions of the hood and that the ventilation duct can be connected to the 150 mm outlet.
- For everyday use, pull out the front panel, switch on the motor and the LED lighting, and select a suitable extraction level according to the amount of fumes and odours.
- After cooking, let the hood run for a few minutes to help remove remaining odours, then switch the unit off and push the front panel back in.
- The grease filter should be removed and cleaned regularly according to the manufacturer’s instructions, either by hand or in a dishwasher, which helps preserve the extraction power and reduce dirt build-up.
Why choose the Electrolux LFP226S hood
The Electrolux LFP226S built-in hood combines a compact pull-out design, LED lighting and a washable grease filter, which makes it a practical solution for a small or medium-sized kitchen. If you are looking for an in-cabinet hood that is designed to be connected to a ventilation duct and offers sufficient air performance for everyday use together with easy maintenance, this model meets those expectations with its neutral appearance and balanced features.











Reviews
There are no reviews yet.