Description
Clean air in a small or medium-sized kitchen with a built-in cooker hood
The built-in telescopic cooker hood Elica ELITE 26 PB IX/A/60 is designed to be installed in a 60 cm wide upper kitchen cabinet to remove cooking fumes and odours directly from above the hob. The discreet design hides the appliance behind the cabinet front, yet the airflow in the range of 240–581 m³/h provides sufficient performance for small and medium-sized kitchens. The stainless steel body and silver finish blend well with the tones of modern kitchen furniture.
Main features
- Built-in telescopic design, 60 cm – installed in an upper kitchen cabinet so that the pull-out front panel is barely noticeable when closed and the overall look of the kitchen stays uniform.
- Airflow 240–581 m³/h – suitable for everyday cooking in small and medium-sized kitchens, helping to reduce steam and odours.
- Extraction through a duct – the air is led out of the kitchen through a 150 mm connection opening, which improves efficiency and helps keep humidity at a lower level.
- LED lighting – the integrated LED lights illuminate the hob evenly and economically so that you can see your cooking better.
- Mechanical controls – simple buttons let you quickly choose a suitable operating mode without complicated electronics.
- Noise level 44–65 dB – with multi-step speed selection you can switch on higher power only when you really need it, keeping noise at a moderate level in normal use.
- Energy label C and consumption of 76 kWh per year – a balance between performance and energy cost in everyday use.
- Stainless steel and silver colour – a durable surface that is easy to clean and suits both light and dark kitchen furniture tones.
How the Elica ELITE 26 PB IX/A/60 fits your kitchen
This built-in cooker hood, 60 cm is designed to be installed in a cabinet unit about 60 cm wide, and the internal dimensions allow for an appliance approximately 59.8 cm wide and 28 cm deep. The height is up to about 301 mm, so before buying it is worth measuring both the inside of the cabinet and the location of the ventilation duct.
The cooker hood is primarily intended to work with extraction through a duct, which leads humid and hot air out of the kitchen. In many kitchens, however, there is a wish to use indoor air recirculation, in which case suitable carbon filters that neutralise odours are needed. If you plan to use the appliance without extraction, check on the product page or with the seller whether the corresponding carbon filters are included or have to be chosen separately.
Elica is a well-known manufacturer of kitchen cooker hoods, and the ELITE 26 PB IX/A/60 is a model with a simple and reliable construction in its class. The stainless steel body and mechanical buttons reduce the amount of complicated electronics, which makes use easy to understand and helps keep maintenance simple.
Installation and use
The cooker hood is installed in an upper kitchen cabinet and connected to a ventilation duct with a diameter of 150 mm. Before installation, measure the internal dimensions of the cabinet and plan the location of the duct. The electrical connection and the installation of the ventilation duct should be done by a qualified specialist to ensure safety and compliance with local requirements.
Everyday use is easy. While cooking, pull out the telescopic front panel, switch on the LED lighting and choose a suitable power level with the mechanical buttons. When the hob has cooled and the air in the kitchen is clear, push the front panel back so that the appliance blends into the kitchen furniture again and collects less dust.
For maintenance, it is important to keep the inside of the cooker hood and the filters clean. The grease filter should be removed and washed regularly according to the instructions in the user manual in order to maintain the airflow of up to 581 m³/h and reduce the fire risk caused by grease build-up. If you use carbon filters, they should be replaced periodically, because over time their odour-binding ability decreases.
When to choose the Elica ELITE 26 PB IX/A/60
Choose the Elica ELITE 26 PB IX/A/60 if you are looking for a built-in telescopic cooker hood that fits a 60 cm wide upper kitchen cabinet, offers airflow of up to 581 m³/h and has simple mechanical controls. The stainless steel body, LED lighting and the option to connect the appliance to a ventilation duct create a practical and discreet solution for everyday cooking in a modern kitchen.


Reviews
There are no reviews yet.