Description
12 V–230 V voltage conversion in a car and indoors
The Inverter Qoltec Monolith 600 W is a voltage converter that changes 12 V DC to 230 V AC, so you can use 230 V devices in a car or indoors. This way you can use a standard 230 V output from a 12 V power source, as long as the total demand of the connected devices stays within the permitted limits. The output frequency is 50 Hz and efficiency is up to 90%. The device has LED indicators and active cooling with an integrated fan.
Main features
- 600 W output power, suitable for powering 230 V devices as long as the total load stays within the permitted limits.
- 12 V input voltage, intended for use in systems with a 12 V power supply.
- 230 V output voltage and 50 Hz frequency, a standard AC output for many 230 V devices.
- USB Power Delivery up to 18 W, for powering devices that charge via USB.
- Active cooling and an integrated fan, helps keep heat away when operating under load.
- LED indicators, for monitoring the device status.
- Protections against short circuit, overvoltage, undervoltage, overheating and overcurrent, helps reduce the risk of failure in unsuitable electrical conditions.
- CE compliance, the device’s declaration of conformity is based on the CE marking.
Compatibility and choosing a safe load
The inverter is intended for use in a car and is also suitable for indoor use. When choosing devices, note that the total power of the connected consumers must not exceed 600 W, and for stable operation it is best to avoid running close to the limit.
USB Power Delivery up to 18 W allows you to charge USB-powered devices directly from the inverter. In case of electrical irregularities, the built-in protections, including overheating, overvoltage, undervoltage, short circuit and overcurrent protection, help.
Installation and use
Place the inverter on a flat surface so that air can circulate freely around the device. Connect the supplied DC cable to the 12 V power source, then connect the 230 V device to the inverter output or use USB PD charging. Monitor the LED indicators and do not exceed the total load. If a protection activates, reduce the load and let the device cool down before using it again.
Included in the package
- DC cable
Why choose the Qoltec Monolith 600 W?
The Qoltec Monolith 600 W combines conversion from a 12 V input to a 230 V output with USB PD charging up to 18 W. Efficiency of up to 90%, active cooling and versatile protections make it a suitable solution when you need 230 V AC from a 12 V power source, both in a car and indoors.















Reviews
There are no reviews yet.