Description
Line-interactive UPS for a personal computer
The line-interactive UPS for a personal computer Qoltec Monolith 53770 supplies battery power to connected equipment during a power cut. When mains power fails, there is time to save unfinished work on the computer.
Voltage regulation and batteries
The UPS has automatic voltage regulation (AVR) and operates on an input voltage of 140–300 V. Output voltage is 220 V ±10% and the output waveform is a simulated sine wave. Power comes from 2 sealed lead-acid batteries rated at 12 V. It protects against short circuit, overvoltage, undervoltage and overload, and the input is fused.
Connections and display
In addition to the sockets, the rear panel has a USB-B port and 2 RJ45 jacks. The front panel has a colour LCD display and a power button.
Installation and use
Install the UPS in a dust-free, well-ventilated place and leave at least 20 cm between it and other equipment. Before first use, connect the UPS to the mains and let the batteries charge for 6 hours. Then plug the equipment’s power cords into the rear outputs and switch the UPS on with the power button. With the cold start function the UPS can be switched on even when there is no mains power.
Cleaning and maintenance
Unplug the UPS before cleaning and do not use liquid or spray cleaners. If the UPS keeps alarming because of low battery voltage, charge the batteries for at least 6 hours. Replace the batteries only with the same number and type of batteries.
In the box
- UPS Qoltec Monolith 53770
- User manual
- USB cable






Reviews
There are no reviews yet.