Description
Full-motion TV wall mount with an extending arm
The LEVEL 550 series Neomounts WL40-550BL18 full-motion TV wall mount carries a 43–75 inch TV of up to 45 kg and fits VESA patterns from 200 × 100 to 800 × 400 mm. The arm swivels the TV up to 54° and the mounting plate tilts between −3° and +15°, so the screen can face the viewing position.
A common VESA mount fits TVs from different makers
A VESA mount is the layout of mounting holes on the back of a flat screen, set by the Video Electronics Standards Association, by which the screen can be attached to a wall mount or stand. The spacing of the hole centres in millimetres, horizontal × vertical, is called the VESA size, and if it is one of the WL40-550BL18 patterns and the TV weight is within the limit, a TV of any brand fits. Smaller patterns use M4 screws, 200 × 200 mm and larger ones M6 or M8 screws, and all these sizes are in the box.
Levelling, hanging and cables
After installation the TV can be levelled by ±3°, so the screen stays horizontal even if the wall plate is slightly off. The stiffness of the arm movement is adjusted with the supplied hex key.
Installation
The wall plate fixes to a wooden stud, solid brick or concrete wall: in a wooden stud M8 × 65 bolts go into a 5.5 mm hole 75 mm deep, in masonry the anchors go into a 10 mm hole 75 mm deep. The adapter brackets are screwed to the back of the TV, with spacers if needed, and two people lift the TV onto the wall plate and secure it with the locking screw. Finally, level the TV and route the cables along the arm to the back of the TV.
In the box
- TV wall mount Neomounts WL40-550BL18, 1 pc
- 2 adapter brackets for the back of the TV
- M4, M5, M6 and M8 TV screws in several lengths
- 5 and 14 mm spacers and M6 and M8 washers
- wall anchors and M8 × 65 bolts
- hex key and spanner











Reviews
There are no reviews yet.