Description
Tilting TV wall mount with hand knobs and a spirit level
The black Gembird WM-100T-01 tilting TV wall mount carries a 43–100-inch TV weighing up to 75 kg and fits VESA patterns from 75 × 75 to 900 × 600 mm. The powder-coated steel mount holds the back of the TV 85 mm from the wall.
Standard VESA mounting fits TVs from different makers
VESA mounting is a fixed layout of four threaded holes on the back of a TV, with the horizontal and vertical spacing given in millimetres, for example 400 × 400. Any TV whose hole spacing and weight are within the limits fits the mount, whatever the TV brand. The kit includes M6 and M8 screws in two lengths, used for TVs with a 200 × 200 mm or larger pattern.
Tilt adjustment and locking
The tilt is set with hand knobs on the TV arms; if the screen does not hold its position, tighten the knobs. The TV arms lock onto the wall plate with automatic spring locks, released by pull cords at the bottom of the arms. A built-in spirit level in the centre of the wall plate helps to mount it level.
Installation on a solid wall or wooden studs
The mount is designed for a solid wall or two wooden studs spaced 406, 450 or 600 mm apart. In concrete, drill 10 mm holes 60 mm deep for the wall plugs; in a wooden stud, drill 4.5 mm holes 55 mm deep. The TV arms are fixed to the back of the TV with screws of the right length, and the TV is then hung on the wall plate by its arms.
In the box
- TV wall mount Gembird WM-100T-01, 1 pc
- TV arms with pull cords, 2 pcs
- Tilt knobs, 2 pcs
- TV screws M6 × 14, M6 × 30, M8 × 16 and M8 × 35, 4 pcs each
- Washers D8, 4 pcs
- Spacers 5 mm and 15 mm, 4 pcs each
- Wall screws ST6.3 × 55, wall plugs Ø 10 × 45 mm and washers D6, 6 pcs each
- Installation manual











Reviews
There are no reviews yet.