Description
Tilting TV wall mount in steel
This tilting TV wall mount is made of powder-coated steel and leaves 53 mm between the TV and the wall. The chosen tilt angle is locked with the two knobs on the sides of the mount. The wall plate has a built-in spirit level. The mount is 243 mm wide and 225 mm high.
Installation
You need a pencil, a drill with a 10 mm bit, a spanner and a Phillips screwdriver. Two people are needed to hang the TV on the wall plate.
- Mark the hole positions on the wall using the wall plate, drill 10 mm holes 60 mm deep and fix the wall plate with the wall plugs, wood screws and washers.
- Fix the two TV rails to the back of the TV with the M6 or M8 screws and washers, using spacers if needed.
- Hang the TV with the rails on the wall plate and tighten the lower screws of the rails.
- Set the tilt angle and tighten the knobs.
In the box
- wall plate
- 2 TV rails
- 4 M6 × 30 screws and 4 M8 × 30 screws
- 4 D8 washers and 4 spacers of 15 mm
- 4 ST6.3 × 55 wood screws, 4 wall plugs 10 × 45 mm and 4 D6 washers







Reviews
There are no reviews yet.