Description
Racing wheel with force feedback, three pedals and a shifter
The PXN V99 racing wheel works with PC (Windows 7, 8, 10 and 11), PS4, Xbox One and Xbox Series X|S, its rotation angle is selectable between 270° and 900°, and the set includes clutch, brake and accelerator pedals and a gear shifter.

Force feedback from two motors
Two motors in the base provide force feedback that passes road bumps, tilt, acceleration and collisions to the wheel. Force feedback strength is set in the PXN Wheel app.

Detachable wheel and four paddle shifters
The wheel locks onto the base with a locking ring and can be removed. Behind the wheel are L1 and L2 paddles on the left and R1 and R2 on the right; the front panel has a D-pad, A, B, X and Y buttons, a HOME button and function buttons.


Three pedals with adjustable angle
Each pedal angle can be changed by loosening two hex screws, setting the pedal to the required angle and tightening the screws again. The app sets the pedal response curves with multiple points.

Shifter with handbrake switch
The shifter has six gears and reverse, a high and low range switch and a handbrake switch, and it clamps to the edge of a desk with a screw clamp.

Installation and connection
The wheel slides onto the base and the locking ring is tightened, then the base is fixed with two desk clamps whose screws are tightened with the hex key. The shifter and pedals plug into the back of the base, the power adapter into the mains and the base USB cable into the PC or console. At power-on the wheel calibrates itself, turning quickly 450° to each side and back to centre.
Modes and console connection
On a PC the wheel starts in DINPUT mode with a red indicator, and holding HOME for 3 seconds switches to XINPUT mode with a purple indicator. With PS4 and Xbox the console’s original controller connects by USB cable to the wheel’s USB port, with the controller switched off while connecting.
Settings in the PXN Wheel app
The smartphone app switches the wheel mode, sets a smaller effective rotation angle in 900° mode and maps the buttons, with the layout saved for next time. The app also holds ready-made button presets for different games.

In the box
- Racing wheel PXN V99, 1 pc
- Wheel base with motors, 1 pc
- Three-pedal unit, 1 pc
- Gear shifter, 1 pc
- Wheel desk clamp, 2 pcs
- Power adapter, 1 pc
- Wheel power cable, 1 pc
- Aviation plug to USB data cable, 1 pc
- Aviation plug to RJ45 data cable, 1 pc
- RJ45 to RJ45 data cable, 1 pc
- USB-C to USB data cable, 2 pcs
- Micro USB to USB data cable, 1 pc
- M6 × 12 mm hex screw, 4 pcs
- M6 washer, 4 pcs
- Hex key, 1 pc






Reviews
There are no reviews yet.