Description
Robotic lawn mower with camera and NetRTK positioning
The mulching robotic lawn mower Airseekers Tron cuts the clippings repeatedly in its FlowCut mulching chamber and leaves them on the lawn as mulch. The double-layer blade cuts the clippings finer so that they reach the soil.
Navigation and obstacle detection
The Tron locates itself with VSLAM, a camera-based mapping method, and NetRTK. NetRTK corrects satellite positioning errors in real time through a cloud service that the mower reaches via its built-in 4G or Wi-Fi module. This needs a stable 4G or Wi-Fi connection across the whole lawn; alternatively, the RTK base station in the box can be used. Trees, walls and narrow passages are detected by a 300° RGB camera.
Mowing on slopes and by zones
The cutting height is adjustable from 3 to 9 cm and the cutting width with the standard disc is 20 cm. The rear wheels are driven by two direct-drive brushless hub motors, and the mower works on slopes of up to 46.6% (25°). In the Airseekers app the lawn can be split into up to 80 zones, each with its own schedule, cutting height and mowing direction. According to the manufacturer, the Tron mows 280–390 m² per hour at a noise level of 65 dB(A).
Battery and charging
The swappable 15 Ah lithium battery (21.9 V, 328.5 Wh) charges fully in 150 minutes. The battery can be taken out of its compartment and replaced with a charged one. When the battery runs low or the rain sensor detects rain, the Tron returns to its charging station.
Installation and mapping
The charging station is placed on a level surface with a clear area of 2 × 2 m in front and fixed with stakes. The RTK base station goes in an open spot at least 2 m from houses or walls. To create the map, drive the Tron along the lawn edge with the app’s remote control and keep it at least 10 cm from walls, fences and ditches.
Cleaning and care
Rated IPX6, the mower is protected against powerful water jets, so it can be rinsed with water. Before cleaning, switch off the battery and wipe the robot with a clean damp cloth. Do not use a pressure washer, alcohol or chemicals. With long use, replace the blade edge or the whole blade every 1–2 months.
In the box
- Airseekers Tron robotic lawn mower
- Charging tower, base plate and charging station adapter
- 10 base plate screws and 10 ground stakes
- RTK base station antenna, mounting poles, ground stake, adapter and cable
- 12 spare blades and 12 spare blade screws
- Mudguard and 3 mudguard screws
- Hex key and screwdriver (2-in-1)
- User manual and quick guide












Reviews
There are no reviews yet.