Description
Robotic lawn mower with RTK base station and camera
The RTK-positioned robotic lawn mower Roborock RockNeo Q110 switches between mowing and charging on its own. Short clippings are left on the lawn, where they act as fertiliser.
Position and obstacles
The included RTK base station provides a precise positioning signal, which the mower’s GNSS antenna uses to fix its position to the centimetre. Objects ahead are detected by the binocular camera and the mower drives past them on a new route. The robot mows in parallel lanes, and the soft camera light lets it work in the dark too.
Mowing and terrain
The cutting width is 22 cm and the cutting height is adjustable from 2 to 6 cm with a dial on top of the mower. The floating cutting deck keeps the cut even on uneven ground. According to the manufacturer, the rear-wheel-drive Q110 handles slopes of up to 45% (24°) and obstacles up to 4 cm high. The sound pressure level LpA is 51 dB(A) and the sound power level LWA is 59 dB(A).
Battery and charging
The lithium-ion battery has a capacity of 4.6 Ah at 21.6 V and, according to the manufacturer, charges fully in 75 minutes. When the battery runs low the mower drives to the charging station and resumes the unfinished job once charged. On a signal from the rain sensor it returns to the station and restarts after the rain delay, 180 minutes by default.
App and theft protection
In the Roborock app you can set a mowing schedule and several zones with their own settings, and set a night pause to leave wildlife in peace. To prevent unauthorised use, the mower has a PIN lock and a loud alarm.
Installation and mapping
The charging station is placed on a level surface in an open area within 10 m of the power supply, with a clear 2 m radius around it and grass shorter than 8 cm. The power supply must sit at least 30 cm above the ground. The RTK base station goes in an open area at least 2 m from walls or fences and connects to the charging station with the RTK extension cable.
During mapping the mower drives along the boundary of the working area as guided by the app and saves the map while you walk behind it.
Cleaning and care
Rated IPX6, the mower body and charging station can be rinsed with a garden hose. Check the mower once a week, clean soil and grass off the wheels and blade disc, and wipe the camera lens with a soft dry cloth. Do not use petrol, alcohol or corrosive cleaners, and do not wash the underside with a pressure washer above 12.0 MPa. The manufacturer recommends replacing the blades every 1–2 months, all blades and screws at once.
In the box
- Roborock RockNeo Q110 robotic lawn mower with pre-installed blades
- Charging tower, charging base plate and 2 screws
- Power supply and power supply extension cable
- RTK base station: GNSS antenna, mounting rods, triangular stake and screw
- RTK extension cable and 4 cable clips
- 6 charging station screws and 10 extension cable stakes
- Spare blade set: 9 blades and 9 screws
- Hex key









Reviews
There are no reviews yet.