Description
Natural rectangular wall mirror
The rectangular wall mirror Scottsdale is surrounded by a narrow MDF frame in a natural tone with a wood grain pattern and an even width on all sides. The back of the frame has hanging fixings on all four edges, so the mirror can be hung both upright and sideways.
Frame and glass
The frame is made of MDF and its surface has a light wood grain pattern. The frame moulding is flat with straight corners, without decoration. The frame and glass are put together at the factory, so the mirror is ready to hang straight away.
Where it fits
Hung upright, the narrow mirror fits on a small piece of wall, for example in a hallway next to the door or above a pouf. If the lower edge is at the height of the pouf, you can see most of your height in this mirror when standing. Hung horizontally, the mirror fits above a low chest of drawers or a bench.
Hanging
The hanging fixings are on the back of the frame at the top, at the bottom and on both long sides. For the work you need a tape measure, a pencil, a drill, a hammer and a Phillips screwdriver. Mark the places for two screws with a pencil, drill the holes, tap the wall plugs in with the hammer and screw the screws into the wall. The screws and wall plugs are not included, choose them according to the wall material and take into account that the wall must support 5 kg.
Care
Clean the glass with a soft cloth and glass cleaner, spraying the cleaner onto the cloth, not onto the mirror. Wipe the MDF frame with a dry or slightly damp cloth. Do not use abrasive cleaning products.
Dimensions and other sizes
The mirror with its frame is 45 × 110 cm and 2.5 cm deep. The mirror weighs 5 kg. The same mirror is also available in the size 45 × 75 cm.







Reviews
There are no reviews yet.