Description
Natural rectangular wall mirror
The rectangular wall mirror Scottsdale hangs on the wall both vertically and horizontally, because the back of the frame has a hanging loop in the middle of each side. The glass is surrounded on every side by a narrow frame of the same width.
Frame and glass
The frame is made of MDF and its natural-toned surface has a light wood pattern. The front of the frame is flat and smooth, without decorations. The glass is recessed into the frame, so the front edge of the frame sits slightly in front of the glass. Together with the frame, the mirror is 2.5 cm deep.
Where it fits
Hung vertically, the mirror also fits on a narrow section of wall, for example above a low bench or pouf, or next to a wall shelf. Hung horizontally, the mirror is 75 cm wide and 45 cm high, so it also suits above a chest of drawers or a console table.
Hanging
The mirror is delivered assembled, so it only needs to be fixed to the wall. On the wall, the mirror hangs on two screws driven in at the same height. Mark the fixing points with a tape measure and a pencil, drill the holes, tap the wall plugs in with a hammer and turn in the screws with a Phillips screwdriver. The screws and wall plugs are not included, so choose them according to the mirror, which weighs 3.2 kg, and the material of your wall.
Care
Clean the glass with a soft cloth: spray the glass cleaner onto the cloth, not onto the mirror, so that the liquid does not run between the frame and the glass. Wipe the frame with a dry or slightly damp cloth. Do not use abrasive cleaning agents.
Dimensions and other sizes
The mirror measures 45 × 75 cm (width × height), 75 × 45 cm when hung horizontally. The Scottsdale wall mirror is also available in the same tone in the size 45 × 110 cm.







Reviews
There are no reviews yet.