Description
Smart plug for load control in a Deye inverter system
The smart plug with energy monitoring Deye SUN-SMART-PLUG01P1-F switches up to 16 A and communicates with the inverter over LoRa radio. The plug goes into an existing socket, and you connect a micro-inverter or a single-phase load to it. The rated voltage is 220–250 V AC.
Control from the button, the inverter, the app and the cloud
In manual mode you switch the plug from its power button, the inverter LCD, the smartphone app or the Deye Cloud web page. In time mode a programmable schedule switches the plug. In Deye Cloud you see the load’s power in real time and set which loads are critical and which are not.
Long radio range and offline operation
The LoRa link uses the 863–870 MHz band and reaches about 200 metres without obstacles. The link between the inverter and the plug also works without internet.
Setup and channel scan
After the first connection the plug finds the inverter’s channel with a channel scan. You reach channel scan mode by holding the power button until all lights go out, and start the scan with a single press. After a successful scan the blue power button light stays on for five seconds. On overcurrent the plug opens the relay and checks the current again a few minutes later.
In the box
- Smart plug Deye SUN-SMART-PLUG01P1-F, 1 pc

Reviews
There are no reviews yet.