Description
The Cecotec Conga M70 robot vacuum with washing function uses laser mapping and up to 20,000 Pa of suction power to clean different rooms in a planned order and, after collecting dust, to do damp mopping. This model suits regular floor care in a multi-room home of up to 180 m², where cleaning times and no-go areas are to be managed from a phone.
Robot vacuum for room-based cleaning
- Laser mapping and APP 3.0: the laser sensor creates an interactive map of the home, from which you can set the cleaning order of rooms, zones, schedules and no-go areas. The app, connected via Bluetooth and 2.4 GHz Wi-Fi, also lets you change cleaning from outside the home.
- Up to 20,000 Pa suction power: the Ungravity motor collects dirt trapped on the floor, and the carpet turbo increases suction when cleaning rugs. Cecotec describes the model as also suitable for high-pile carpets.
- Silicone anti-tangle brush roll: the silicone surface of the central brush roll is designed to reduce the risk of pet hair wrapping around it. One side brush guides dust and debris along the wall towards the suction opening.
- Three-level water mopping function: the flat mop pad takes water from the 0.42 l water tank, and three water flow levels help adjust dampness according to how dirty the floor is. The robot vacuums, sweeps and damp mops within one cleaning schedule.
- Up to 250 minutes of operation: the 4,500 mAh battery allows, according to the manufacturer, up to 250 minutes of operation and cleaning of up to 180 m². Total Surface 3.0 takes the robot to the charging dock when needed and continues the unfinished cleaning schedule after charging.
Room-based floor care with laser mapping
The interactive home map helps you direct the robot, for example, first to the hallway and kitchen and leave the bedroom for later. This is useful in a home where different rooms are used differently and the whole floor area does not need to be cleaned equally thoroughly every time. The robot’s body, 11 cm high, moves under furniture only where there is enough space between the furniture and the floor.
The 0.4 l dust bin collects dry dirt inside the robot and needs to be emptied by hand after cleaning. The charging dock included in the set keeps the robot charged for the next cleaning schedule, but preparing the floor is the user’s task: before starting, pick up cables and small loose objects, and keep the robot away from stairs. The washing function is intended for damp wiping of floors with the flat mop pad, not for soaking up spilled liquids. The Conga M70 is not a wet and dry vacuum cleaner.
Included in the box
The box contains the robot vacuum cleaner, a flat mop pad and a charging dock.









Reviews
There are no reviews yet.