Description
Robot vacuum for wet and dry cleaning of hard floors and low-pile carpets
The Kärcher RVC 3 robot vacuum maps your home with a LiDAR sensor and cleans hard floors and low-pile carpets with up to 15,000 Pa suction. When the battery runs low, the robot drives back to its charging dock by itself and resumes cleaning after charging. Cliff sensors detect stairs and steps, and at 9.7 cm high the robot fits under beds, sofas and wardrobes.
LiDAR navigation measures the room with a laser and builds a map of your home
LiDAR navigation is a way for a robot vacuum to find its way: a laser sensor measures the distance to walls and furniture from reflected light pulses and builds a map of the rooms from these measurements. The RVC 3 cleans systematically along this map, row by row, and finds its way in a dark room too. A camera robot maps a room by image features; a LiDAR robot is the choice when you want an accurate map and an orderly cleaning path.
Set maps, schedules and no-go zones in the Kärcher Indoor Robots app
The robot connects to a 2.4 GHz Wi-Fi network and is controlled with the Kärcher Indoor Robots app or the buttons on its body. In the app you can map several floors, set schedules and define no-go zones, virtual walls and cleaning zones. There are three cleaning modes (wet, dry and combined), and in each you can choose between four suction levels and three water levels.
Mop cloth and 2-in-1 container for wet cleaning
Dust and water share one 2-in-1 container with a 0.24 l dust compartment. For wet cleaning, fill the water tank with clean water under the rubber flap, moisten the mop cloth, wring it out and fix it to the mop holder with the hook-and-loop strip. For dry cleaning and before charging, remove the mop holder with the cloth.
Getting started
Place the charging dock where there is at least 0.5 m of free space on each side and at least 1.5 m in front, out of direct sunlight. On the first start the robot builds a map of your home and updates it after every cleaning run.
Cleaning and care
The comb-tooth structure of the main brush and the shaped side brush keep hair from wrapping around the brushes. Clean the filter under running water with the supplied cleaning tool and let it dry fully before refitting. Kärcher recommends replacing the filter and the side brush every 3–6 months and the main brush every 6–12 months.
In the box
- Robot vacuum Kärcher RVC 3, 1 pc
- Charging dock
- Power adapter
- 2-in-1 dust container with water tank
- Mop holder
- Mop cloth
- Side brush
- Filter
- Cleaning tool











Reviews
There are no reviews yet.