Description
Upholstered Recco dining chair with a rounded backrest
The seat and wide backrest of the Recco armless dining chair are upholstered and covered with a sand-coloured fabric. The backrest is rounded, curves forward at the edges and is attached to two posts that continue upwards from the rear legs. The seat has rounded corners and the legs are wood-toned metal, joined under the seat by a crossing frame. The chair is intended for use at a dining table.
Material and finish
The cover is 100% polyester, the padding is polyurethane foam, and metal and plywood are also used in the construction. The fabric’s abrasion resistance is 74,000 Martindale cycles: that is how many rubbing cycles the fabric withstood in the test. The fabric is melange and brown and light threads can be seen on the surface.
Dimensions
The chair is 53 cm wide, 57 cm deep and 79 cm high, where the depth covers the whole chair including the backrest. The seat height is 48.5 cm and the seat depth is 50 cm. The chair weighs 7.5 kg.
Use and suitability
On the back of the backrest there is a curved wood-toned slat, which remains visible when the chair is at the table.
Delivery and assembly
The frame with the backrest and legs is ready on delivery, and the seat is attached to it with four bolts (M6 × 65 mm). The bolts and an Allen key are included. Assemble the chair on a soft surface, for example a rug, to avoid scratches. Tighten the screws again two weeks after assembly and then every three months.
Care
Wipe the fabric with a damp cloth and use only clean water. Dust and dirt can be removed with a vacuum cleaner or a clean soft cloth. Do not use detergents, solvents or other chemicals, as they may change the colour of the fabric. The chair has been tested for home use and for a load of 110 kg.









Reviews
There are no reviews yet.