Description
Floor TV stand with a swivelling, height-adjustable mount
The ONKRON TS5065-B TV stand holds a 30–60 inch TV weighing up to 41 kg and swivels the screen up to 54° either way. The TV is carried by a steel pole and two mounting plates standing on a tempered glass base measuring 550 × 400 mm.
TVs of different makes fit the stand thanks to the VESA mount
A VESA mount is a standard pattern of mounting holes on the back of a flat-panel TV that lets the screen be fixed to a wall mount or a stand. The TS5065-B mounting plates fit VESA patterns from 100 × 100 to 400 × 400 mm, the VESA size being the distance between hole centres horizontally and vertically. A VESA stand fits any brand of TV whose hole spacing and weight fall within the stand’s limits.
Adjustable height and cable routing along the pole
The TV height on the pole can be adjusted by hand. Cables run along the pole and are held by cable clips. The screen can be mounted in landscape or portrait orientation. With its rubber feet the base can also stand on top of a TV cabinet.
Assembling the stand
The pole is fixed to the base from below with a round plate, three washers and three M6 × 30 screws, tightened with the supplied S5 hex key. A Phillips screwdriver is also needed for assembly.
In the box
- ONKRON TS5065-B TV stand, 1 pc (glass base, three-part pole, two mounting plates)
- TV mounting screws M5 × 14, M6 × 14, M6 × 30, M8 × 30 and M8 × 50, 4 of each
- Washers D5/D6/D8, 4 pcs
- Spacers 17 × 8.2 × 5 mm and 17 × 8.2 × 10 mm, 8 of each
- Base assembly screws M6 × 30 with washers, 3 pcs
- Cable clips, 2 pcs
- S5 hex key


Reviews
There are no reviews yet.