Description
CPU air cooler with five heat pipes
The single-tower CPU air cooler AK500 WH carries processor heat into the heatsink through five copper heat pipes. The heat pipes are 6 mm in diameter. The manufacturer has tuned the internal capillary structure and liquid volume of the heat pipes so that heat transfer works the same in vertical and horizontal cases.
Fan and low-speed adapter
The heatsink is cooled by an FK120 fan with a fluid dynamic bearing (FDB); the motherboard controls its speed through a 4-pin PWM connector. With a standard connection the fan runs at 500–1850 rpm, with 68.99 CFM of airflow and up to 31.5 dB(A). With the included low-speed adapter (LSP) the fan runs at 500–1550 rpm, with 52.24 CFM of airflow and noise up to 25.9 dB(A).
Memory clearance and installation
The angled offset heat pipes leave the memory slots clear, so memory modules with tall heat spreaders fit beside the cooler. On quad-channel motherboards the rear slots have 45 mm of clearance. The all-metal mounting brackets fit Intel and AMD platforms, and extra fan clips are included for adding a second fan.
Compatibility
The cooler fits motherboards with the following CPU sockets.
- Intel: LGA2066, LGA2011-v3, LGA2011, LGA1700, LGA1200, LGA1151, LGA1150, LGA1155
- AMD: AM5, AM4
In the box
- CPU air cooler with FK120 fan
- Thermal paste in a syringe
- L-shaped screwdriver
- Low-speed adapter (LSP)
- 2 fan clips for an additional fan
- Intel backplate
- 4 mounting brackets
- Mounting screws and nuts, 16 pcs in total









Reviews
There are no reviews yet.