Description
AIO CPU liquid cooler with ARGB fans and a frosted pump cap
The three-fan AIO CPU liquid cooler DeepCool LE360 V2 consists of a 360 mm aluminium radiator, three 120 mm fans mounted on it and a pump with a copper base plate. The radiator uses DeepCool’s patented Anti-Leak Technology. The cooler fits Intel and AMD sockets: Intel LGA 1851, LGA 1700, LGA 1200, LGA 1151, LGA 1150 and LGA 1155, and AMD AM5 and AM4.
Pump and fan speed
The pump’s three-phase 4-pole motor connects through a 4-pin PWM cable, so the motherboard sets the pump speed itself; the pump draws 3.48 W. The hydro-bearing fans run at 500–2100 rpm with an airflow of up to 75.89 CFM and a noise level of up to 31.6 dB(A).
ARGB lighting controlled by the motherboard
ARGB, or addressable RGB, means that each LED can show its own colour. The fan and pump lighting connects to the motherboard’s 5 V 3-pin ARGB header, and the frosted pump cap diffuses the light into an even glow.
Installation on Intel and AMD sockets
On Intel LGA 1200 and LGA 115X, set the backplate pins to the LGA 1200 position, place the backplate behind the motherboard and screw four standoffs in from the front. Then fix the Intel brackets to the pump with four screws and secure the pump to the standoffs with four nuts. On LGA 1851 and LGA 1700 the same backplate fits in its other position with the standoffs for those sockets, and on AMD AM5 and AM4 you use the AMD brackets and screws. The pump cable goes to the motherboard’s AIO_PUMP or W_PUMP header and the fan cable to CPU_FAN or CPU_OPT.
In the box
- AIO CPU liquid cooler DeepCool LE360 V2 with pre-installed fans, 1 pc
- Radiator mounting screw, 12 pcs
- Radiator front-mounting screw, 12 pcs
- Intel backplate, 1 pc
- Intel mounting bracket, 2 pcs, and bracket screw, 4 pcs
- Standoff for LGA 1200 and LGA 115X, 4 pcs
- Standoff for LGA 1851 and LGA 1700, 4 pcs
- Pump mounting nut, 4 pcs
- AMD mounting bracket, 2 pcs, and AM5/AM4 screw, 4 pcs
- Fan splitter cable, 1 pc


Reviews
There are no reviews yet.