Description
AIO CPU liquid cooler with an LCD pump cap and ARGB lighting
This AIO CPU liquid cooler with LCD combines an aluminium radiator, three 30 mm thick fans and a sixth-generation pump. The pump’s expanded copper base and fine microfins carry heat from the CPU into the coolant, up to 350 W of heat according to the manufacturer. An anti-leak valve releases pressure when the internal pressure exceeds atmospheric pressure.
Screen and control with DeepCreative software
The screen has a resolution of 480 × 480 pixels, 750 cd/m² brightness and 16.7 million colours. In DeepCreative you can choose to show CPU temperature, load, frequency and pump speed, pictures, GIF animations, MP4 videos or data graphs. The software sets fan and pump speed to the CPU load, with Silence AI, Performance AI, Sleep, Office, Gaming and Overclocking modes. When the CPU exceeds 80 °C, the fans run at full speed until the temperature drops below 80 °C.
Pump, fans and lighting
Pump speed is PWM-adjustable between 2,500 and 3,400 rpm. The fans run at 500–2,000 rpm with 112.5 CFM airflow and up to 32.89 dB(A), and stop below a 5% duty cycle. Power and signal for the pump and screen run through a single 10-pin connector, and the hub sets fan speed and ARGB lighting per channel.
Installation
The rear-lock backplate lets you install the cooler from the front of the motherboard without screws. An offset bracket for LGA 1851 places the cold plate over the CPU hotspot and lowered temperatures by 1–3 °C in the manufacturer’s lab. The hub mounts with a magnet or screws, and the pump cap attaches magnetically.
Compatibility
- Intel LGA 1851 and LGA 1700
- AMD AM5 and AM4
In the box
- radiator with pump and tubes
- 3 fans
- fan and ARGB hub
- mounting brackets for Intel and AMD sockets
- connection cables and screws








Reviews
There are no reviews yet.