Description
Robot vacuum with a multifunction station that vacuums and mops at once
The Kärcher RVM 4 Comfort Extra robot vacuum vacuums with up to 15,000 Pa suction while mopping with two spinning mop discs. Along walls the right mop extends so that edges get mopped too.
With LiDAR navigation the robot plans its clean
LiDAR navigation is a robot vacuum mapping method in which a laser sensor finds the distance to walls and furniture from the time light takes to reflect back, and the robot builds a map from these readings. The RVM 4 Comfort Extra scans the rooms with LiDAR and then cleans them one by one, mapping even in a dark room. A dual line laser sensor and a camera spot low objects such as shoes, socks and cables that are too low for the LiDAR. Compared with a robot that navigates by images, here the map is laser-measured and the camera adds object detection.
Carpet detection and Auto Boost
An ultrasonic sensor recognises carpet and marks it on the app map. When mopping, the robot avoids the carpet or crosses it with the mop discs lifted, and Auto Boost raises suction on carpet.
The station empties the dust bin and dries the mops
The station draws debris from the robot’s 0.3 l dust bin into a 2.3 l filter bag, washes the mops and dries them with hot air. The clean water tank holds 2.5 l and the used water tank 3 l.
Battery and the KÄRCHER Indoor Robot app
The 5200 mAh lithium-ion battery charges in about 230 minutes. In the app you can create maps for several floors, set schedules, no-go zones and virtual walls, and choose the water amount, suction and number of passes for each room. The manufacturer provides software updates until 31 December 2032.
Getting started
Place the station on a water-resistant floor out of direct sunlight, leaving at least 0.5 m at the sides and 1.5 m in front. Fit the side brush and mop discs to the robot, insert the filter bag into the station and fill the clean water tank with cold or lukewarm tap water up to the MAX mark. The robot connects to the app over a 2.4 GHz Wi-Fi network.
Cleaning and maintenance
Clean the sensors and charging contacts at least once a month with a soft cloth. Clean the dust bin with the supplied cleaning tool, rinse the filter under running water and let it dry completely. Empty and rinse the used water tank, and wash and dry the mop pads.
In the box
- Robot vacuum Kärcher RVM 4 Comfort Extra, 1 pc
- Multifunction station
- Power cord
- Mop discs with mop pads, 2 pcs
- Filter bags, 4 pcs
- Side brush
- Cleaning tool










Reviews
There are no reviews yet.